- tz - lists.iana.org

Confirmation of data for Estonia
by Peter Ilieve Oct. 15, 1994

Oct. 15, 1994

I apologise in advance to whoever produced the data for Estonia in the 93e data as they may have known it was authoritative, but there is no source given. A relative in Tallinn confirms the accuracy of the data for 1989 onwards and gives the legal authority for it, a regulation of the Government of Estonia, No. 111 of 1989. It is interesting to me that changing their timezone arrangements was one of the first things they did in the process of getting out from under 50 years of Soviet occupation. My source doesn't know if any changes will be made in 1996 and beyond to track the change in EU dates specified in the European 7th directive. Even though the dates are currently the same the Estonians change an hour before the EU, at midnight GMT. Peter Ilieve peter(a)memex.co.uk

1 0

New Daylight Savings dates for South Australia
by John Warburton Oct. 7, 1994

Oct. 7, 1994

Hello, I belive that the timezone files are being centrally managed by you. You will be interested to know that the new Daylight Savings dates for South Australia (zone Australia/Adelaide*) was gazetted in the Government Hansard on Sep 26 1994. start: Sunday 30 October end: Sunday 26 March i.e. start on last Sunday in October and end in last sunday in March. (*) Just a note of concern. Vendor distributed timezone file that I have seen (SunOS, UnixWare) describe timezones by Australian state eg Australia/South, Australias/Tasmania etc, rather than this new method of naming zones by the capital city. I'm just wondering where it came from & is it really correct, as timezone affect the whole stae and not just the capital city. John (who fears daylight savings each year...) -- John Warburton jwarb(a)SACBH.com.au ASPECT Computing email address valid until 31/12/94 You miss the vendor... The vendor hits! The vendor hits! The vendor hits! --More-- You die...

1 0

[bugs@freebsd.org: Re: Timezone bug in 1.1R]
by Garrett Wollman Sept. 25, 1994

Sept. 25, 1994

I will fix this in FreeBSD; here is the problem for the benefit of other TZ users... ------- start of forwarded message (RFC 934) ------- Message-Id: <199409250603.GAA18199(a)apu.fi> Precedence: bulk From: Hannu Strang <chs(a)apu.fi> Sender: bugs-owner(a)freebsd.org To: bugs(a)freebsd.org Subject: Re: Timezone bug in 1.1R Date: Sun, 25 Sep 1994 06:03:37 GMT > Well, here in Helsinki we're just changing from summer time to > regular one, and it's supposed to change at 4am... > This 1.1R box just changed the time, and it's now only 3am. > So the change is off by one hour... Not that it matters too > much, just felt like reporting it. > > Is the timezone code changed in 1.1.5.1 or 2.0? > >lrwxrwxr-x 1 root 35 Jun 10 22:09 /etc/localtime -> >/usr/share/zoneinfo/Europe/Helsinki There seems to be an error in /usr/src/share/zoneinfo/europe also in 2.0. Zone for Finland (Europe/Helsinki) ends up with line 2:00 M-Eur EET%s which should be 2:00 E-Eur EET%s instead. Zone EET (which I have been using) is correct. Estonia, Latvia, Lithuania, Bulgaria, Greece, Moldova, Romania, Turkey, Ukraine (Europe/Kiev) look suspicious the same way but I don't know about them. ------- end -------

1 0

South Australia fools around with it's timezone again
by Mark Prior Sept. 21, 1994

Sept. 21, 1994

Just when I thought the politicians had got some sort of system into our magic roundabout of a timezone they play about with it again! It appears that even though there is no Adelaide Festival next year we are ending daylight saving on March 26 (ie we are using the even year rule in an odd year). Apparently we are doing this to stay in line with Victoria and Tasmania so maybe this is for Moomba or something. NSW and ACT are finishing daylight saving as usual on March 5. At least they haven't played with the start of daylight saving which is still the last Sunday in October. So next year's rule is Rule AS 1995 only - Mar 26 2:00 0 - Mark.

4 5

time zone map
by ado Sept. 4, 1994

Sept. 4, 1994

A time zone map of unknown pedigree is available from wuarchive.wustl.edu; the file is multimedia/images/jpeg/unindexed/940901/timezon2.jpg. --ado

1 0

mktime() failures under PCTS testing
by eggert＠twinsun.com Aug. 31, 1994

Aug. 31, 1994

If you'll recall, the tz package `mktime' normally returns -1 when given a time in a `spring-forward' gap, but the NIST-PCTS:151-2 test suite, Version 1.4, (1993-12-03), claims that this is a bug. In March I submitted a formal Defect Report about this to the committee responsible for the C Standard, and have just received a copy of the draft response (SC22/WG14 DR#136). This response has been approved by WG14 but is subject to a final review, so it is not official yet. The response reads as follows: The Standard does not specify the behavior precisely enough to preclude `mktime' from returning a value of `(time_t)-1' and leaving the `tm_isdst' member set to -1 in such situations. In other words, assuming this response becomes official as expected, PCTS must not insist that mktime yield a value other than -1 in such situations. Perhaps someone who's familiar with PCTS (which I am not) can forward this info to PCTS's maintainers. Here's the example program that I submitted as part of Defect Report #136. According to the draft response, a conforming implementation in a U.S. locale can print `mktime failed' when presented with the following program, since the requested time is in a `spring-forward' gap. #include <stdio.h> #include <time.h> int main() { struct tm t; time_t r; /* 1994-04-03 02:30:00 */ t.tm_year = 1994 - 1900; t.tm_mon = 3; t.tm_mday = 3; t.tm_hour = 2; t.tm_min = 30; t.tm_sec = 0; t.tm_isdst = -1; /* i.e. unknown */ r = mktime(&t); if (r == -1) printf("mktime failed\n"); else printf("%s", ctime(&r)); return 0; }

1 0

FYI - More on Six Digit Dates
by Monty Solomon Aug. 26, 1994

Aug. 26, 1994

Begin forwarded message: Date: Fri, 26 Aug 1994 09:56:09 -0500 (EST) Newsgroups: tdr.problems From: Problem Reporting Service <PROBLEMS(a)tdr.com> Organization: Tansin A. Darcos & Company, Silver Spring MD USA Errors-To: PROBLEM-ERRORS(a)tdr.com Subject: 0027 - Responses to Issue #26 (Digest, Long) To: Recipients of list Problems <PROBLEMS(a)tdr.com> Problems Digest Fri, 26 Aug 1994 Volume 94 : Issue 27 Today's Topics: Reasons for Creating #26 Re: Six Digit Dates (20 Msgs) Administrivia: Feel free to circulate this or other PROBLEMS messages. To Reply to this or any earlier PROBLEMS message, write to <PROBLEMS(a)TDR.COM>; for private replies or subscriptions use <problems-request(a)tdr.com>; or use newsgroup <tdr.problems>. Please feel free to redistribute this article widely. This message is file ftp.digex.net:/pub/access/tdarcos/0027 ---------------------------------------------------------------------- Date: Date: Sun, 21 Aug 1994 15:14:01 -0500 (EST) From: Paul Robinson <PAUL(a)TDR.COM> Subject: Reasons for Creating Problems #26 Many of you were already aware of the issue of 6-digit dates. The point being that whining about "oh dear oh my oh no we're all going to die when the plants blow up" doesn't solve anything. The main issue - and some other people also gave out some excellent suggestions - was to think up a method to {solve} the problem. We already know the problem exists (or at least I hope most of us do), but finding a solution to the problem wasn't well publicized. The best solution in response to my posting comes from On the secondary note, yes, I am aware that "technically" the century ends on December 31, 2000. But the problem we have is the "de facto" end of the century which is the day after 12/31/99 when six digit dates roll over to 01/01/00. About one advantage we have is that it's a Saturday. (I looked it up. The real issue is come Monday, 3 Jan 2000 when people are not going to be pleased by what has happened.) I say "de facto" meaning the date when virtually everyone will celebrate the end of the 20th Century (December 31, 1999) as opposed to the logically correct "de jure" end of the Century of December 31, 2000). There is a good discussion on this issue in James Michener's "Texas", where some people in the 1890s are discussing when the 19th Century ends. The Intelligent people point out that time in AD started with year 1, therefore each century is 100 years and thus the 19th century ends on December 31, 1900, which is 1900 years later. The book also has an hilarious religious discussion where a preacher "solves" the issue by expostulating that God made the first century only 99 years long! So, the half-dozen or so people who logically arrived at 1901 as the beginning of the new century, celebrated then. ------------------------------ Date: Fri, 12 Aug 1994 22:42:30 -0600 From: Daniel Packman <pack(a)acd.ucar.edu> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates > By coding the date into a character field, effectively in base 32, it > would be possible to encode a larger date and still only use 6 characters. As a programmer involved exclusively in the scientific area, it is instructive to see how things are done in "the real world". One rather standard way to encode date in the scientific world is the Julian Date which as a binary 32 bit number is both more compact and covers a greater range (more than 4000 years into the past and future). [MODERATOR'S NOTE: Good idea, if the application can support using binary. I suspect most of the old applications using 6-digit dates are COBOL programs using either "USAGE IS DISPLAY" (6 characters) or "USAGE IS COMP-3" (Packed Decimal). Some of these systems may be running applications that display dates or that can't do binary conversions, but can handle string conversions. This is why I felt a "string" format was better than a binary format. But that's a matter of taste. What counts is what will work. Switching to a DISPLAY format or a non-binary format might allow a minimal change to these old programs, some of which may be older than some of us reading these messages! But if there is an effective means to allow programs to maniuplate julian dates in binary, that's not a bad idea.] ------------------------------ Date: Sat, 13 Aug 1994 07:27:52 -0400 (EDT) From: Larry Nathanson <lan(a)panix.com> To: Problem Reporting Service <PROBLEMS(a)tdr.com> Subject: Re: Six Digit Dates Just one point-- that it might be wise for companies to start testing their machines by resetting their system clocks ahead and seeing what breaks... The risks of causing errors by testing may well be outweighted by the risks of letting things go till 2000 is months away... [MODERATOR'S NOTE: Another good idea. Only problem is you may not be able to do this in all circumstances. Does a bank change the time on its ATM network to see what happens? :) Yes, yes, if someone's running a mission-critical system I would hope they are running a duplicate system or independent system to allow testing, e.g. there is a separate set of ATM machines that are connected to the duplicate system and they dispense memos instead of cash, and can be used for testing the network and its updates. At least I *hope* they are doing this...] ------------------------------ Date: Mon, 15 Aug 1994 10:03:23 -0400 (EDT) From: "John G. Otto" <otto(a)garnet.acns.fsu.edu> To: problems(a)tdr.com Subject: Re: Six Digit Dates > ...The problem is probably not as bad as it was, because with the > introduction of IBM PCs which support dates past the year 2100, > the issue isn't a problem except to the extent of programs that > still use six-digit dates... > What do we need to do? > (1). If your site has inhouse applications, and lots of source files, > you need to push for the acquisition of automated checking tools. > (2). You need to push for the manpower and resources necessary to do the > work now rather than later, because "later" won't be budgeted for. > (3). You need to push for the updating of databases to allow full > 8-digit dates. > (4). Push for all reports to eliminate use of 6-digit dates, even in > display fields. > (5). Find out what your vendor is doing if you use canned applications. Well, yes, the solution is to stop the problem. The ISO standard for dealing with dates (8601:1988 superseding 2014, 2015, 2711, 3307 & 4031) has been around for a while; Control Data was beginning to make use of it some 15 years ago. Interestingly enough, Gary Houston, the author of the summary available on-line, does not follow the standard himself within that summary, using little-endian form (as is customary in Europe, and as opposed to month first inside-out form customary in the USA). An example of ISO 8601:1988 compliant date/time is: 2001-01-15T14:23:38 or 20010115T142338 One nice feature of the form is that it sorts as one field without converson. [idea regarding using alpha to cram more into same size date field deleted] > If we work on the problem now while there is time, we can do this with > less error and better control, than trying to rush fixes in November of > 1999 when errors could spell disaster. Think of it as employment security. :B-)} jgo [MODERATOR'S NOTE: I believe the 6-digit date form is a FIPS Standard and is required in certain government computing applications. Anyone know if this was true and if this was ever repealed?] ------------------------------ Date: Mon, 15 Aug 1994 10:07:08 +0700 From: Tyrannosaurus Wes <wes(a)windjammer.raxco.com> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates >>>>> "0026" == Problem Reporting Service <PROBLEMS(a)tdr.com> writes: 0026> The problem is the issue of six-digit dates and the turn of 0026> the century, now less than six years away. 0026> And I thought of a method. 0026> In fact, if one wants to encode the month and day - Month 0026> encoded to add A,B and C and day encoded as 1-9 and A-V, it 0026> is possible to use 4 digits for the year and still fit 0026> everything into 6 bytes. Or encode both and fit everything 0026> into 4 bytes. 0026> This would also then work for places using packed decimal 0026> for the six-digit year and thus only allowing 4 bytes. Most modern languages, operating systems, and database management systems have some sort of intrinsic date format. Whenever software systems are modified to support extended date handling, a better approach, I feel, would be to convert the 6-character date fields already in use to the "native" date format. Modern languages and DBMS provide support for manipulating dates in these formats, alleviating problems with oddities like leap-seconds, leap-centuries (of which 2000 is one), and the like. Data-file conversion is an issue with this method, but is an issue with any method; the dates *must* be converted. Since this method may require expanding the date field, the availability of direct-access storage may become an issue. -- Wes Peters -- software engineer, network coordinator, system wrangler, chief cook and bottle washer, Raxco Inc., Orem UT Wes(a)Raxco.COM [MODERATOR'S NOTE: That was exactly what I was worried about. I had to think of some method that would use the same amount of space or less, yet still cover a full date field. Also, there is still some software that only generates 6-digit dates. I think DBASE III's DATE() function returns a date in the form MM/DD/YY. Not good.] ------------------------------ Date: Tue, 16 Aug 1994 15:11:46 -0500 From: Tim Horrigan <u2re9toh(a)hanover-crrel.army.mil> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates It's a sad commentary on human nature that this problem wasn't anticipated 35 years ago when this software was first being written. This problem is coming up and biting organizations much earlier than one might think. For example, Dartmouth College (like many colleges, presumably) belatedly discovered last winter that it was possible to have members of the Class of '00 being registered as soon as that coming summer (i.e, what is now right now.) (This happens, for example, if some kid opts for a 5-year program such as a 3-2 Engineering program and then decides to take a year off before starting her course of study.) They _think_ they found all the date fields in their software, but of course they can't be sure. Disclaimer: The views expressed in this message are certainly not those of the Army Corps of Engineers, and they might not even be mine if I were to take the time to think things through a little more thoroughly :-) ------------------------------ Date: Tue, 16 Aug 1994 14:11:36 -0500 From: "Patricia J. Seymour" <pseymour(a)iseg01.imd.cig.mot.com> To: problems(a)tdr.com Subject: Re: Six Digit Dates Hello- I've just read the article "Danger of Six-Digit Dates" in the latest Risks Digest. I understand and agree about the magnitude of the problem, but I don't understand why you are considering Friday, December 31, 1999 to be the "last date of this century." Centuries have one hundred years in them, not 99. The true eve of the next century is December 31, 2000. (That's why the film was entitled "2,001") It's the same as trying to buy something that costs $2,000 with only $1,999 in your pocket. (We are assuming tax as already being figured in the price. :) ) -Patricia (Illinois) [Moderator's Note: Yeah, yeah, I know and I got burned on this one; I am aware of the issue, and intend to use it as an excuse to celebrate twice! Seriously though, does anyone think we're going to convince the vast majority of people, or TV programs doing reviews of the 20th Century that it ends on December 31, 2000? Assuming Dick Clark is still around (doesn't that man ever get any older??) want to bet his show on December 31, 1999 is going to claim we are beginning the 21st Century! ] ------------------------------ Date: 16 Aug 94 16:05:01 EDT From: A S Oliphant <100126.2551(a)compuserve.com> To: Problem Reporting Service <PROBLEMS(a)tdr.com> Subject: Re: Six Digit Dates Interested to read your mail. I have been suggesting such scenarios to several employers over the last 15 years. In fact my current one is starting to grapple with the issue at the moment. However, by a quirk of fortune, our problem is possibly not as big as you suggest. Without naming names, I work in the life assurance business. We computerised early on and dates presented us with similar, if opposite, problem then. That was the need to record dates of birth for existing policy holders born in the 19th century. We therefore devised a method using 4 bytes as follows: Byte 1 - day of month Byte 2 - month Byte 3 and Byte 4 - year (+sign) e.g. 194C is 1994, the C is the sign to make the whole field look like packed decimal (ebcdic). While we have to write special routines to decode and manipulate these dates, it means that our end of century conversion will not be as onerous as for some. [Moderator's Note: I'm glad to hear that. This one isn't too bad a suggestion. There are several good ideas being given out here, and I hope some of them will help people fix their systems before they collapse.] ------------------------------ Date: Tue, 16 Aug 94 14:27:36 PDT From: Andrew Klossner <andrew(a)frip.wv.tek.com> To: PROBLEMS(a)tdr.com Newsgroups: comp.risks Subject: Re: Six Digit Dates Just in case nobody else pointed this out ... "The last date of this century is Friday, December 31, 1999." The last date of this century is 1 January 2000. Centuries run from x01 through x00, because there was no year zero. [Moderator's Note: Yeah, yeah and it's illegal to drive 70 MPH on a public highway in the U.S., but people still do it. I made the mistake of admitting that I, on the occasional time I rent a car because I have to go somewhere, *do* usually drive 55 in the fast lane of the freeway, and people considered *me* a criminal. It's not popular to be 'de jure' correct when that is entirely different from what the general public sees as the 'de facto' correct answer.] ------------------------------ Date: Wed, 17 Aug 94 11:02:52 +0200 From: Udo Voges <voges(a)iai.kfk.de> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates If a solution to this problem is found, it should include the correct international representation of the date, eg. year/month/day, which solves also the misunderstandings with month/day/year and day/month/year. [Moderator's Note: Good point. More than half of the addresses on this list are identifiable as being outside of the U.S., Canada or Mexico, not counting the .COM or .EDU sites that might also be. There are probably three major formats for dates, e.g. M/D/Y as the U.S. does it, D/M/Y is common in Europe or Japan, and Y/M/D as is also used in Japan, I think. Possibly I should write an Internet Draft for publication as an RFC to publicly define a standardized date format for computer data files and to help fix the six-digit issue. Any suggestions?] ------------------------------ Date: Wed, 17 Aug 94 11:38 BST From: mathew <mathew(a)mantis.co.uk> To: problems(a)tdr.com Newsgroups: comp.risks Subject: Re: Six Digit Dates Mike Sullivan <74160.1134(a)compuserve.com> quotes: >>From: Problem Reporting Service <PROBLEMS(a)TDR.COM> >>Subject: 0026 - Exactly. What do we do? (Six Digit Dates) >>Date: Fri, 11 Aug 1994 23:00:58 -0500 (EST) [...] >The last date of this century is Friday, December 31, 1999. 12-31-99. >Want to tell me what the next date after that is? Saturday, January 1, 2000. >01-01-00. Incorrect. The last date of this century is Sunday, December 31st, 2000. The first date of the 21st century is Monday, January 1st, 2001. Hmm, I won't be asking TDR to fix *my* date routines... ( Arthur C Clarke chose "2001" as the title of the book and film because it's the first year of the next century. ) [Moderator's Note: Clarke also said that the worldwide phone system would eliminate tolls on all calls anywhere in the world. I'm not sure how that would be paid for, but it's an interesting concept. Oh yes, is he referring to ME when he uses the term 'TDR' or the services of my company? :) Actually, that's why my domain name is 'TDR.COM' because I have used a login name of 'TDARCOS' for many years, and people started referring to me as TDR. The name stuck, so I decided to use it.] ------------------------------ Date: Wed, 17 Aug 1994 11:35:31 -0400 (EDT) From: Bradley White <bww+(a)transarc.com> To: Problem Reporting Service <PROBLEMS(a)tdr.com> Subject: Re: Six Digit Dates > Which date is earlier, 01/01/99 or 01/03/00? I would say 01/01/99. > What is the mathematical difference between 12/15/99 and > 01/03/00? About 99 years. I would say 19 days. If you are only going to use `00'-`99' to represent a year, you need to select an appropriate point of discontinuity. The choice is undoubtedly time and application dependent. 99->00 clearly isn't the best choice at the moment for almost all applications. [Moderator's Note: No it isn't, but I suspect many applications didn't take the effective year in mind when they were coded, but take the actual year. But from a mathematical standpoint chances are - unless the program was designed correctly in the first place - I'd figure a program would treat a date of 12/31/00 as earlier than 01/01/99. By 98 years and change.] ------------------------------ Date: Wed, 17 Aug 1994 14:59:00 -0400 From: Dan Astoorian <djast(a)utopia.druid.com> To: risks(a)csl.sri.com, PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates >>From: Problem Reporting Service <PROBLEMS(a)TDR.COM> >>Newsgroups: tdr.problems >>Subject: 0026 - Exactly. What do we do? (Six Digit Dates) > >By coding the date into a character field, effectively in base 32, it >would be possible to encode a larger date and still only use 6 characters. >By encoding the year to use the letters of the alphabet, e.g. AA through >ZZ plus A0 through Z0, it is possible to cover more than 900 years, e.g. >start counting with 1400 through 2300, thus covering any date that could >have occurred during civilization. Rather pessimistic to assume that civilization will end before the year 2300, wouldn't you say? ;-) I'm sure it comes as a surprise to no one that this approach has been considered before. There are a number of problems with it. Given that with current dates, the year <x>9 is followed by <y>0, (for 0 <= x < 9 and y := x + 1), imposing an ordering which used the entire space of [0-9A-Z][0-9A-Z] would necessarily be a fairly complicated algorithm; in fact, I expect that any such ordering (allowing A-Z for the units digit of the year) would be unwieldy for a human troubleshooter to determine the real year from the encoding easily, and equally difficult for an implementor to get verifiably correct. Using alphabetic characters for the tens' digit would still buy a couple hundred years, though. However, any such "extension" to the storage encoding needs to be mapped to a readable date for the end users: Reports generated with dates of "Monday, January 3, 19A0" will not be acceptable (even if the report does not cause errors by being used as input to other software modules.) This is at least as large a problem as the storage issue. >One of the things that is necessary is to make programs expecting numbers >fail so that they can be changed. Programs that read these records will >have to expect both old and new format records, while programs that write >them should only output the new format. This assumes, of course, that the failure mode of a program which got a non-number when it expected a number will be reasonable; how valid is that assumption? I can easily imagine programs figuring the difference between the years 2000 and 1998 by the calculation "98" -> (('9'-'0') * 10) + 8 = (9 * 10) + 8 = 98 "A0" -> (('A'-'0') * 10) + 0 = (-47 * 10) + 0 = -470 "A0" - "98" = -470 - 98 = -568 years. (Of course, if the computation were performed in ASCII rather than EBCDIC the difference would only be +72 years.) We haven't even spoken of the issue of how dates will be communicated *between* machines which use 6-digit dates. >If you have better ideas on how to solve the six-digit problem, please >write back. Probably the most common suggested solution is to change the date-comparison algorithms to consider any date with a numerical value smaller than some threshold <N> to be a 21st-century date; eg., say that '50' means 2050, but '51' means 1951. This works if all the dates you want to represent are within a century of each other (and, of course, if the years wrap around from 99 to 00 smoothly, which isn't a given; what happens if you subtract 2 years from (20)01? Will you get "99", "-1", or something worse?) The other common suggestion is to add a separate 2-digit field for the century; as packed decimal this would require only one additional byte for each date represented in the record. There's no law that says that the century and the year need to be physically contiguous, so it may not be that difficult to find a couple of unused bytes somewhere in the data records to keep the extra information without requiring drastic database changes. This would also mean that many reporting programs would not need to be changed immediately, as they would continue to produce reports in the same form as before, assuming that they were not hard-coded to prepend "19" to the year. For many companies it is cost-effective to solve the *general* problem (the mainframe) rather than the specific problem (6-digit dates); the mainframes are expensive to maintain, and they won't be around forever. Cobol 85 compilers and online transaction processing systems are available for Unix. (At the RISK of Cantering: my employer sells a Unix OLTP system for COBOL users; for more information send mail to this address or to info(a)allross.com. 'Nuff said.) [Moderator's Note: How about 'mea culpa', 'mea maxima culpa' for a plea for mercy for me and my big mouth in not thinking about the way that came out. Or should I say, 'for me and my fat fingers?' :) '2399' was a reasonable alternative to 9999; my use of the term 'civilization' was pushing backward toward the earliest possible date that someone would have date references for. Since Columbus landed on Cuba in 1492 I doubt we need to worry about earlier dates. (Yes, I know about the Vikings being in North America in the 1100s, but they didn't publicize it very well.) Adding space to some data files is not an option in the near future in some installations. I think TRW, for example, has something like 180 million credit reports on file. If each report has 10 entries that use dates, that's 3 billion bytes of disk space that have to be added just to stretch these files by a measly 2 bytes. Then, you have to go back and edit every single program that uses those files to tell them that the file is now two bytes longer in every record. Many of these files are on old DASD which means the files would require migration to expand them and thus would raise all sorts of problems. Personally I think that if programs have to be changed to fix this problem - and they do - the change should be as light as possible and the minimum necessary to fix it, considering how fragile many programs are. Changing a program to add a means to recalculate the date is probably less of a change than expanding every record definition and reference to the file data to add two bytes. In the long run this is the correct answer, e.g. that the file data should support 8 digit dates, and hopefully as systems move off those old mainframe dinosaurs that served us so well, the data files will be updated. Some might say 1700 might have been far enough back. Consider that here in Maryland a local jurisdiction will celebrate a special anniversary in three years. As it says on the freeway signs: Welcome to Prince Georges' County, Established 1697. As far as 2399 is concerned, I personally, do not expect this civilization to last even that long. I will be surprized if the current civilization lasts another 50 years; whether things get better or worse is a matter of taste; explaining my reasons why is too complicated an issue to do in less than a complete issue and is way off the subject here. However, the point has been raised so I will discuss it in a later issue. ] ------------------------------ Date: Wed, 17 Aug 94 14:33:55 -0500 From: Steve Peltz <peltz(a)cerl.uiuc.edu> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates Re: Article forwarded to RISKS Instead of doing funny things with the year field, it seems much easier (and easier to deal with BCD fields) to play with the month. Add 12 to the month for the next century. Add 12 more for the century after. That should hold us for about 7 more centuries into the future. If that isn't enough (and if a program sticks around through 20 years of computer evolution, it will probably last 800), add 33 to the day field and go through 8 more centuries. At that point, it is probably time to put your foot down and demand that the old programs be completely re-written (but at least you still have another 8 centuries to go before they have to be completed, since you can still add another 33 to the day field). [Moderator's note: 'If a program sticks around through 20 years of computer evolution, it will probably last 800.' That statement probably needs to be recorded for posterity. This solution sounds like an even better solution than mine. So far, this sounds like the best 'interim' solution to the problem. 'Interim' meaning until what the previous two messages stated; make the data files two bytes bigger for every date field. Preferably making the addition contiguous to and part of the date.] ------------------------------ Date: Thu, 18 Aug 1994 12:32:37 -0500 (EDT) From: Jeff Jonas <jeffj(a)telerate.com> To: problems-request(a)tdr.com Subject: Re: Six Digit Dates I just read your posting in the RISKS digest about the 6 digit year problem. Unfortunately, most COBOL programmers may have used packed-decimal coding or BCD for the year, where there's really no tolerance for digits other than 0-9 despite 4 bits per digit. Even if you could force values >9 to the date, the arithmetic routines normalize the year back to values 0-9. I'm fortunate to work in the Unix environment where the native date format is in seconds since Jan 1, 1970 so that reaches well into 2000 before wrapping. [Moderator's Note: And VMS (the operating system for VAX and Alpha processors) goes back to the 1800s as does the $HOROLOG function of the MUMPS / M Programming Language.] ------------------------------ Date: Thu, 18 Aug 94 10:46:42 edt From: Mike_Perry(a)dge.ceo.dg.com To: problems-request(a)tdr.com Subject: Re: Six Digit Dates Message: I saw your posting via RISKS DIGEST. I hope your worst fears aren't realised, but things ARE going to go bad, that's for sure, and I'd be surprised if they aren't already, with calculations that look forward in time - as you say, it's less than 6 years away. I encountered this (type of) problem several years ago with a project planning system that used absolute week numbers based on week1=date_the_system_went_live. 3 digits were allowed for week numbers, and sure enough, some 14 years later, a project with a 5-6 year timespan tripped over to week 0......... BTW - the last day of this century, (and this millenium) is December 31, 2000, not 1999. Regds., Mike ------------------------------ Date: Thu, 18 Aug 1994 12:17:25 -0700 From: Brian Kantor <brian(a)nothing.ucsd.edu> To: problems-request(a)tdr.com Subject: Re: Six Digit Dates no doubt a million other people have written to point out that the last day of the century is Dec 31, 2000, not 1999. The rest of your note is well-taken, though. - Brian ------------------------------ Date: Fri, 19 Aug 94 16:46 CDT From: "William G. Lederer" <wgl(a)mcs.com> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates Just one note on your otherwise fine and informative article. The century actually does not end until the end of the day on December 31, 2000. I predict, however, that journalists and the like will also get this one wrong. [Moderator's Note: I fully support your prediction. :) ] ------------------------------ Date: Mon, 22 Aug 1994 11:54:25 -0600 From: Thomas McNeill <TGM(a)wordperfect.com> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates In almost all cases it will not be necessary to change to 8 digit dates, at least not immediately. All you have to do is change the routines that calculate the difference between two dates. In those routines, add 2000 to years less than 50 to arrive at the full year, and add 1900 to years greater than or equal to 50. This will gives us approximately 50 years of breathing room to implement the real fix, which is to go to 8 digit dates. Changing the encoding scheme in the disk files so that 6 bytes encodes a larger range of dates would require not only recoding the applications, but also making passes through all the files to change the encoding scheme. [Moderator's Note: This is a good answer to the message sent to me privately on the subject, which appears as a summary as the last item in this digest, two entries below. ] ------------------------------ Date: Wed, 24 Aug 94 15:59:09 PDT From: Russell Brand <brand(a)reasoning.com> To: PROBLEMS(a)tdr.com Subject: Re: Six Digit Dates I am one of the developers of a program understanding & re-engineering tool called Refine/COBOL [tm]. Some of the most interesting applications of our tool have been to modify legacy COBOL systems so as allow them to be continue to be used past the year 2000. Some of my users started hitting the problem in 1993 because as their budgetting offices had 7 year projects. For some of these firms, they are using the program analysis tools to automatically find things that look like dates, and modify comparisions and differences such that 00-49 represents 2000-2049 rather than 1900-1949. While there was some discussion of using other encoding (trating the high order digit as HEX rather than decimal) and making somewhat different set of conversions. I would be interesting in hear other approaches that have been attempted. Some description of my groups work can be found in the May 1994 issue of _Communications of the ACM_ or on our world wide web server www.reasoning.com /Russell brand(a)reasoning.com ------------------------------ Date: Fri, 26 Aug 1994 08:21:55 -0400 (EDT) From: Paul Robinson <PAUL(a)TDR.COM> Subject: Re: Six Digit Dates From: Paul Robinson <PAUL(a)TDR.COM> Organization: Tansin A. Darcos & Company, Silver Spring, MD USA ----- On Thu, 25 Aug 1994, "someone" wrote to say the following, which has been paraphrased: Arthur C Clarke's book "The Ghost of the Grand Banks" discusses this, and in the book a character writes a benign computer virus whose task is to change routines using 2 digit years to 4 digit ones. Interesting concept. One of the problems is huge databases; some of them are currently, shall we say "maxxed out" on multipack systems in terms of the amount of space used; to add any material to the files would require either shutting down the system and rebuilding the database, or running a specialized conversion program simultaneously with the applications so that the conversion program is doing a rebuild to add the additional space to the file as a new file, while the applications in use are running, plus logging their transactions so that their updates can be carried across. Either is not a pleasant idea. Beyond that, let's say a company has, say, 125 million current transaction records covering such things as last 90 days of payments, charges, etc, e.g. a bank with, say, 2 million credit cards, loans and depositors, an average of perhaps 50-60 transaction lines per customer. To add a measly two bytes to just update current transaction information means adding a whopping 250 million bytes of storage just for this. If they have even longer data retention periods (let's say it's more than 90 days) the disk drive requirements are somewhat more. Mainframes aren't PCs. You can't just simply add another disk drive which costs about $500 for 1gb. First, mainframe drives are more expensive for a variety of reasons including multiple access. Next, you have to add the disk space (which may require updating operating system tables), then migrate the file records over to the new pack, while deleting the old ones in order to free up space, unless you want replicated copies of the database at the same time, which could get expensive. Assuming those 125 million current transaction records use about 100 bytes each, this means the bank has 12.5 thousand million (12.5 billion) bytes of current transaction data. That would be a lot of extra disk space and even converting is going to be a lot of I/O and will take time. I am not convinced of the benefits suggested by your cure. To make those modifications will require amending many thousands of lines of code. Exactly. And we will have to have automated tools; the job is too large to do manually. I'm thinking of creating some. (I could use the money, too. :) ). So why not simply expand to 4 digit dates at the same time, which would be stable for 8,000 more years until we have to change the date system anyway... Eventually that will have to be done. But one of the things to remember is that because many computer systems are extremely fragile, that we want any change to be (1) as simple as possible and (2) do only the minimum necessary to avoid damaging the system as running. They used to tell something similar to this to physicians (in relating to an attempt by programmers not to make a change that damages the running application), "First, do no harm." Also, we should try to make the changes so that if we can, we prevent the occurrence of "feature interactions". A "feature interaction" is when doing one thing causes a change or an indeterminant state in another, e.g. if you have both call waiting (allowing you to take two calls on your line) and hunt group (causing calls coming into your line to transfer to another line) both on the same line, when the second call comes in, does call waiting kick in first (allowing the second call on the line) or does hunt group kick in first (transferring the second call)? It depends on how the software is set up, which means that using both call waiting and hunt group on the same line causes a "feature interaction." [Moderator's Note: I think it's clear, long term we will have to code 8-digit dates into files, and if we use something akin to the suggestion to change the day of the month or the day of the year, we can stave off major code changes until these applications migrate to servers and such and it solves the problem for us, as long as the new files have the space in them. Which of these is the acceptable solution is a matter of taste; I like the changing of the day or month fields so that programs that don't change them will show up with bad dates in display fields. Question to consider: how much "free" space should be left in a data file and when should it be rebuilt? Here's a suggestion; any database should initially provide 20% of the space in each record for future use, e.g. in a record that needs 100 bytes, the record should be 120 bytes (or make it 128 to be even with a power of 2 since it's close) and then the files should be re-epanded when the amount of free space drops below 10%, so that you don't have this kind of crunch again. This may seem ridiculously high and wasteful, but how wasteful is it to have to stretch and squeeze to add something that has to be done that had the resources been left there ahead of time, would not be a problem? Harvey Mackay, in his book "Swim With the Sharks" says that you should "dig your well before you are thirsty.". I think the comment is appropriate here. Provide the space in advance, before it's needed and finding the space later is less of a problem. Fixing the 6-digit problem would have been trivial if this had been done. Yes, yes, I know disk space was very expensive a while back; I remember about 12 years ago when one of my bosses was trying to Jew down the supplier of a disk pack to reduce the price of a 100 meg pack from $700 to $600. This is for the removable pack alone, the disk drive was something like $12,000. In any case, the price of disk space should no longer be as much of a problem. (Then again, some places would have no trouble paying a consultant $5,000 to tell them the information I supplied in issue #26 and this issue, but would take forever to raise $2,000 if one of their employees wanted to order a couple GB more disk space.) Am I wrong, or are there a lot of systems that don't have the space to add two bytes to each record in a major, company-critical data base because the record *is* "maxxed out" and there is no room left in the records for additions without rebuilding the database, which is seen to be about as much fun as anesthesia-less root-canal surgery? You can write me privately if you don't want to wash your dirty laundry in public.] ------------------------------ End of Problems Digest V94 Issue #27 ************************************

1 0

tzdata94f.tar.gz
by ado Aug. 20, 1994

Aug. 20, 1994

The file tzdata94f.tar.gz in the ~ftp/pub directory on elsie.nci.nih.gov reflects (with thanks!) the latest data updates from Paul Eggert. --ado

1 0

7th EC directive on summer time
by Peter Ilieve Aug. 18, 1994

Aug. 18, 1994

I was just sitting down to type this in when Paul Eggert's mail with all the suggested changes arrived. I now have the text of the 7th EC directive on summer time arrangements (94/21/EC), which was approved on 30 May. This was a few days before I spoke to the EC Information Office in Edinburgh back in June, but they didn't know about it then, which is disappointing. It confirms the dates set out in the Common Position document I reported in June. The major changes from existing practice are that 1995 will be the last year that the UK and Eire finish on a different date from everyone else, and the common end date from 1996 onwards will be the last Sunday in October. The dates again, taken from my last mail: Year Start End End (UK & Eire, 1995 only) (rule) (last Sun) (last Sun) (4th Sun) 1995 26 March 24 September 22 October 1996 31 March 27 October 1997 30 March 26 October I agree with the change that Paul has suggested, of having a rule of Oct Sun>=22 for 1990--95, rather than only for 1995. There is no sign of a UK Summer Time Order yet. Our parliament is on holiday until about October so it won't appear until then I guess. They didn't go into recess until about two weeks ago so they had plenty of time since 30 May to get organised. It is almost inconceivable that the UK Order wouldn't follow these dates, as the rest of the EU has effectively moved to our ending date, but anything is possible with politicians. Austria has already voted in a referendum to join the EU on 1 Jan 95 and it looks almost certain that Finland, Norway and Sweden will as well. I seem to have lost my up-to-date tzdata files so I don't know if they already have these countries using EU rules, but they will from 1995. Peter Ilieve peter(a)memex.co.uk

1 0

proposed changes to tz data
by eggert＠twinsun.com Aug. 18, 1994

Aug. 18, 1994

I went through all the messages to the tz list in the past weeks plus a few notes I had made to myself, and came up with the following proposed changes to the tz data. Aside from comments, the changes are: * Adjust the Australia/Adelaide rule to reflect known behavior since 1990 reported by John Connolly, Robert Elz, and Bradley White. * Adjust Asia/Novosibirsk to reflect that it switched time zones in March, as reported by Stanislaw Kuzikowski. Add a new zone Asia/Tomsk, since Tomsk did not switch and we need a Russian city that is +0700. * Change `Asia/Almaty' to `Asia/Alma-Ata'. This is in keeping with the policy of using traditional English names. And even the _Economist_, which brought up the name `Almaty' in the first place, has gone back to calling that city `Alma-Ata'. * Repair LMT typos for Atlantic/Faeroe, Europe/Vaduz, Pacific/Enderbury, and Pacific/Wallis (thanks to Gwillim Law); and for Europe/London (thanks to Peter Ilieve). * Include two more historical events where the clock changed by 24 hours, one in Asia/Manila in 1844, the other in Pacific/Samoa in 1879. I still don't know the details about America/Anchorage in 1867. The most important changes to commentary are notes under GB-Eire and M-Eur about the proposed 7th EU daylight savings time directive; thanks to Peter Ilieve for this. A simple switch of commentary and code can be done if the EU proposal is adopted. diff -c ty/asia tz/asia *** ty/asia Sat Jun 4 10:12:51 1994 --- tz/asia Thu Aug 18 09:36:57 1994 *************** *** 4,10 **** # go ahead and edit the file (and please send any changes to # tz(a)elsie.nci.nih.gov for general use in the future). ! # From Paul Eggert <eggert(a)twinsun.com> (November 18, 1993): # # A good source for time zone historical data outside the U.S. is # Thomas G. Shanks, The International Atlas (3rd edition), --- 4,10 ---- # go ahead and edit the file (and please send any changes to # tz(a)elsie.nci.nih.gov for general use in the future). ! # From Paul Eggert <eggert(a)twinsun.com> (August 18, 1994): # # A good source for time zone historical data outside the U.S. is # Thomas G. Shanks, The International Atlas (3rd edition), *************** *** 15,20 **** --- 15,24 ---- # Whitman Publishing Co, 2 Niagara Av, Ealing, London (undated), which # I found in the UCLA library. # + # A reliable and entertaining source about time zones is + # Derek Howse, Greenwich time and the discovery of the longitude, + # Oxford University Press (1980). + # # I invented the abbreviations marked `*' in the following table; # the rest are from earlier versions of this file, or from other sources. # Corrections are welcome! *************** *** 287,293 **** 5:30 - IST 1942 Sep 5:30 1:00 IST 1945 Oct 15 5:30 - IST ! # The following are like India/Calcutta: # Andaman Is # Lakshadweep (Laccadive, Minicoy and Amindivi Is) # Nicobar Is --- 291,297 ---- 5:30 - IST 1942 Sep 5:30 1:00 IST 1945 Oct 15 5:30 - IST ! # The following are like Asia/Calcutta: # Andaman Is # Lakshadweep (Laccadive, Minicoy and Amindivi Is) # Nicobar Is *************** *** 509,519 **** 2:00 Jordan EET%s # Kazakhstan - # From Paul Eggert <eggert(a)twinsun.com> (November 18, 1993): - # Before 1993, Almaty was known by its Russian name ``Alma-Ata''. # From Shanks (1991): # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Asia/Almaty 5:07:48 - LMT 1924 May 2 5:00 - TSK 1957 Mar 6:00 Russia TS%s --- 513,521 ---- 2:00 Jordan EET%s # Kazakhstan # From Shanks (1991): # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Asia/Alma-Ata 5:07:48 - LMT 1924 May 2 5:00 - TSK 1957 Mar 6:00 Russia TS%s *************** *** 673,678 **** --- 675,682 ---- # This will undoubtedly change soon. # Philippines + # Howse writes (p 162) that until 1844 the Philippines kept American date. + # The rest of this data is from Shanks. # Rule NAME FROM TO TYPE IN ON AT SAVE LETTER/S Rule Phil 1899 only - May 11 0:00 0 S Rule Phil 1936 only - Nov 1 0:00 1:00 D *************** *** 682,688 **** Rule Phil 1978 only - Mar 22 0:00 1:00 D Rule Phil 1978 only - Sep 21 0:00 0 S # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Asia/Manila 8:04:00 - LMT 1899 May 11 8:00 Phil P%sT 1942 May 9:00 - JST 1944 Nov 8:00 Phil P%sT --- 686,693 ---- Rule Phil 1978 only - Mar 22 0:00 1:00 D Rule Phil 1978 only - Sep 21 0:00 0 S # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Asia/Manila -15:56:00 - LMT 1844 ! 8:04:00 - LMT 1899 May 11 8:00 Phil P%sT 1942 May 9:00 - JST 1944 Nov 8:00 Phil P%sT diff -c ty/australasia tz/australasia *** ty/australasia Mon Feb 7 06:57:49 1994 --- tz/australasia Thu Aug 18 09:07:12 1994 *************** *** 52,58 **** Rule AS 1972 only - Feb 27 3:00 0 - Rule AS 1973 1985 - Mar Sun>=1 3:00 0 - Rule AS 1986 1989 - Mar Sun>=15 3:00 0 - ! Rule AS 1990 max even Mar Sun>=22 3:00 0 - Rule AS 1990 max odd Mar Sun>=1 3:00 0 - # Zone NAME GMTOFF RULES FORMAT [UNTIL] Zone Australia/Adelaide 9:14:20 - LMT 1895 Feb --- 52,58 ---- Rule AS 1972 only - Feb 27 3:00 0 - Rule AS 1973 1985 - Mar Sun>=1 3:00 0 - Rule AS 1986 1989 - Mar Sun>=15 3:00 0 - ! Rule AS 1990 max even Mar Sun>=18 3:00 0 - Rule AS 1990 max odd Mar Sun>=1 3:00 0 - # Zone NAME GMTOFF RULES FORMAT [UNTIL] Zone Australia/Adelaide 9:14:20 - LMT 1895 Feb *************** *** 181,187 **** # Zone NAME GMTOFF RULES FORMAT [UNTIL] Zone Pacific/Tarawa 11:32:04 - LMT 1901 # Bairiki 12:00 - NZST ! Zone Pacific/Enderbury -12:35:40 - LMT 1901 -12:00 - KJT 1979 Oct -11:00 - SST Zone Pacific/Kiritimati -10:29:20 - LMT 1901 --- 181,187 ---- # Zone NAME GMTOFF RULES FORMAT [UNTIL] Zone Pacific/Tarawa 11:32:04 - LMT 1901 # Bairiki 12:00 - NZST ! Zone Pacific/Enderbury -11:24:20 - LMT 1901 -12:00 - KJT 1979 Oct -11:00 - SST Zone Pacific/Kiritimati -10:29:20 - LMT 1901 *************** *** 330,336 **** # Wallis and Futuna # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Pacific/Wallis 11:44:40 - LMT 1901 12:00 - NZST # Western Samoa --- 330,336 ---- # Wallis and Futuna # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Pacific/Wallis 12:15:20 - LMT 1901 12:00 - NZST # Western Samoa *************** *** 344,354 **** # go ahead and edit the file (and please send any changes to # tz(a)elsie.nci.nih.gov for general use in the future). ! # From Paul Eggert <eggert(a)twinsun.com> (November 18, 1993): # A good source for time zone historical data outside the U.S. is # Thomas G. Shanks, The International Atlas (3rd edition), # San Diego: ACS Publications, Inc. (1991). ! # Except where noted below, it is the source for the data above. # # I invented the abbreviations marked `*' in the following table; # the rest are from earlier versions of this file, or from other sources. --- 344,362 ---- # go ahead and edit the file (and please send any changes to # tz(a)elsie.nci.nih.gov for general use in the future). ! # From Paul Eggert <eggert(a)twinsun.com> (August 18, 1994): # A good source for time zone historical data outside the U.S. is # Thomas G. Shanks, The International Atlas (3rd edition), # San Diego: ACS Publications, Inc. (1991). ! # Except where noted, it is the source for the data above. ! # ! # Another source occasionally used is Edward W. Whitman, World Time Differences, ! # Whitman Publishing Co, 2 Niagara Av, Ealing, London (undated), which ! # I found in the UCLA library. ! # ! # A reliable and entertaining source about time zones is ! # Derek Howse, Greenwich time and the discovery of the longitude, ! # Oxford University Press (1980). # # I invented the abbreviations marked `*' in the following table; # the rest are from earlier versions of this file, or from other sources. *************** *** 547,552 **** --- 555,570 ---- # numbered year (from 1990). That's when the Adelaide Festival # is on... + # From Robert Elz (March 16, 1992, 00:57:07 +1000): + # DST didn't end in Adelaide today (yesterday).... + # But whether it's "4th Sunday" or "2nd last Sunday" I have no idea whatever... + # (it's just as likely to be "the Sunday we pick for this year"...). + + # From Bradley White (April 11, 1994): + # If Sun, 15 March, 1992 was at +1030 as kre asserts, but yet Sun, 20 March, + # 1994 was at +0930 as John Connolly's customer seems to assert, then I can + # only conclude that the actual rule is more complicated.... + # Australia/Tasmania # From Bradley White (March 4, 1991): *************** *** 706,711 **** --- 724,735 ---- ############################################################################### + # Fiji + + # Howse writes (p 162) that in 1879 the British governor of Fiji + # enacted an ordinance standardizing the islands on +12:00. + # Perhaps it didn't take. We go with Shanks's more precise date in 1915. + # Kwajalein # In comp.risks 14.87 (26 August 1993), Peter Neumann writes: *************** *** 713,715 **** --- 737,746 ---- # August 20, 1993. Thursday night at midnight Kwajalein switched sides with # respect to the International Date Line, to rejoin its fellow islands, # going from 11:59 p.m. Thursday to 12:00 m. Saturday in a blink. + + # Pacific Islands Trust Territories + + # Howse writes (p 162) ``The Spaniards, on the other hand, reached the + # Philippines and the Ladrones from America,'' and implies that the Ladrones + # (now called the Marianas) kept American date for quite some time. + # Ignore this for now, as we have no hard data. See also Asia/Manila. diff -c ty/europe tz/europe *** ty/europe Sat Jun 4 10:12:52 1994 --- tz/europe Thu Aug 18 10:17:10 1994 *************** *** 35,41 **** # 4:00 KSK KSD Kuybyshev* # 5:00 ESK ESD Yekaterinburg* # 6:00 OSK OSD Omsk* ! # 7:00 NSK NSD Novosibirsk # 8:00 ISK ISD Irkutsk* # 9:00 YSK YSD Yakutsk* # 10:00 VSK VSD Vladivostok* --- 35,42 ---- # 4:00 KSK KSD Kuybyshev* # 5:00 ESK ESD Yekaterinburg* # 6:00 OSK OSD Omsk* ! # 6:00 NSK NSD Novosibirsk (was 7:00 until 1994) ! # 7:00 TSK TSD Tomsk* # 8:00 ISK ISD Irkutsk* # 9:00 YSK YSD Yakutsk* # 10:00 VSK VSD Vladivostok* *************** *** 56,61 **** --- 57,83 ---- # United Kingdom + # From Peter Ilieve <peter(a)memex.co.uk> (July 6, 1994): + # + # On 17 Jan 1994 the Independent, a UK quality newspaper, had a piece about + # historical vistas along the Thames in west London. There was a photo + # and a sketch map showing some of the sightlines involved. One paragraph + # of the text said: + # + # `An old stone obelisk marking a forgotten terrestrial meridian stands + # beside the river at Kew. In the 18th century, before time and longditude + # was standardised by the Royal Observatory in Greenwich, scholars observed + # this stone and the movement of stars from Kew Observatory nearby. They + # made their calculations and set the time for the Horse Guards and Parliament, + # but now the stone is obscured by scrubwood and can only be seen by walking + # along the towpath within a few yards of it.' + # + # I have a one inch to one mile map of London and my estimate of the stone's + # position is 51 deg. 28' 30" N, 0 deg. 18' 45" W. The longditude should + # be within about +-2". The Ordnance Survey grid reference is TQ172761. + # + # [This yields GMTOFF = -0:01:15 for London LMT in the 18th century.] + # From Paul Eggert <eggert(a)twinsun.com> (November 18, 1993): # # Howse writes that Britain was the first country to use standard time. *************** *** 548,553 **** --- 570,597 ---- # 1993 28 Mar 24 Oct fixed # 1994 27 Mar 23 Oct fixed + # From Peter Ilieve <peter(a)memex.co.uk> (June 8, 1994): + # The European Union bureaucracy has edged a step closer to a 7th Directive + # on summer-time arrangements. I have the text of a Common Position + # (EC No 9/94) and a statement of the Council's reasons dated 4 March 94, + # reported in the Official Journal of the EC, No. C 137/38--41.... + # The dates again: + # Year Start End End (UK & Eire, 1995 only) + # (rule) (last Sun) (last Sun) (4th Sun) + # 1995 26 March 24 September 22 October + # 1996 31 March 27 October + # 1997 30 March 26 October + + # From Peter Ilieve <peter(a)memex.co.uk> (March 28, 1994): + # The UK/Eire end date of 22 October [1995] conflicts with your current rule of + # Oct Sun>=23, and the historical UK formula of Sun after 4th Sat. + # The last time 4th Sun and Sun after 4th Sat differed was in 1989, + # when 29 October was used. That year was covered by a UK Summer Time Order + # for only a single year and it looks as though there was a matching 4th EC + # directive for just this year. I don't have the text of the 5th EC + # directive (for 1990--92) but my guess would be it said 4th Sun. + # To maintain strict historical accuracy you could start a new UK ending rule + # of Oct Sun>=22 in 1990. # From Paul Eggert <eggert(a)twinsun.com> (November 18, 1993): # *************** *** 652,660 **** # Current rules Rule GB-Eire 1981 max - Mar lastSun 1:00s 1:00 BST Rule GB-Eire 1981 max - Oct Sun>=23 1:00s 0 GMT # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Europe/London -0:00:37 - LMT 1847 Sep 22 0:00 GB-Eire %s 1968 Feb 18 2:00 1:00 - BST 1971 Oct 31 2:00 0:00 GB-Eire %s --- 696,708 ---- # Current rules Rule GB-Eire 1981 max - Mar lastSun 1:00s 1:00 BST Rule GB-Eire 1981 max - Oct Sun>=23 1:00s 0 GMT + # Under the 7th EU proposal, replace the above line with the following three: + #Rule GB-Eire 1981 1989 - Oct Sun>=23 1:00s 0 GMT + #Rule GB-Eire 1990 1995 - Oct Sun>=22 1:00s 0 GMT + #Rule GB-Eire 1996 max - Oct lastSun 1:00s 0 GMT # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Europe/London -0:01:15 - LMT 1847 Sep 22 0:00 GB-Eire %s 1968 Feb 18 2:00 1:00 - BST 1971 Oct 31 2:00 0:00 GB-Eire %s *************** *** 708,713 **** --- 756,764 ---- Rule M-Eur 1977 only - Sep lastSun 2:00s 0 - Rule M-Eur 1978 only - Oct 1 2:00s 0 - Rule M-Eur 1979 max - Sep lastSun 2:00s 0 - + # Under the 7th EU proposal, replace the above line with the following two: + #Rule M-Eur 1979 1995 - Sep lastSun 2:00s 0 - + #Rule M-Eur 1996 max - Oct lastSun 2:00s 0 - Rule M-Eur 1981 max - Mar lastSun 2:00s 1:00 " DST" Rule E-Eur 1981 max - Mar lastSun 3:00s 1:00 " DST" *************** *** 945,951 **** 1:00 M-Eur MET%s 1945 Apr 2 2:00 1:00 Denmark MET%s 1980 Apr 6 2:00 1:00 M-Eur MET%s ! Zone Atlantic/Faeroe 0:27:04 - LMT 1908 Jan 11 # Torshavn 0:00 - WET 1981 Mar 29 1:00 0:00 W-Eur WET%s Zone America/Scoresbysund -1:29:00 - LMT 1916 Jul 28 --- 996,1002 ---- 1:00 M-Eur MET%s 1945 Apr 2 2:00 1:00 Denmark MET%s 1980 Apr 6 2:00 1:00 M-Eur MET%s ! Zone Atlantic/Faeroe -0:27:04 - LMT 1908 Jan 11 # Torshavn 0:00 - WET 1981 Mar 29 1:00 0:00 W-Eur WET%s Zone America/Scoresbysund -1:29:00 - LMT 1916 Jul 28 *************** *** 1269,1275 **** # Liechtenstein # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Europe/Vaduz 0:30:04 - LMT 1894 Jun 1:00 - MET 1981 Mar 29 2:00 1:00 M-Eur MET%s --- 1320,1326 ---- # Liechtenstein # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Europe/Vaduz 0:38:04 - LMT 1894 Jun 1:00 - MET 1981 Mar 29 2:00 1:00 M-Eur MET%s *************** *** 1618,1629 **** 5:00 1:00 OSD 1991 Sep 29 2:00s 5:00 - OSK 1992 Jan 19 2:00s 6:00 Russia OS%s Zone Asia/Novosibirsk 5:31:40 - LMT 1924 May 2 6:00 - NSK 1957 Mar 7:00 Russia NS%s 1991 Mar 31 2:00s 6:00 1:00 NSD 1991 Sep 29 2:00s 6:00 - NSK 1992 Jan 19 2:00s ! 7:00 Russia NS%s Zone Asia/Irkutsk 6:57:20 - LMT 1880 6:57 - LST 1924 May 2 7:00 - ISK 1957 Mar --- 1669,1694 ---- 5:00 1:00 OSD 1991 Sep 29 2:00s 5:00 - OSK 1992 Jan 19 2:00s 6:00 Russia OS%s + # From Stanislaw A. Kuzikowski <S.A.Kuz(a)iae.nsk.su> (June 29, 1994): + # But now it is some months since Novosibirsk is 3 hours ahead of Moscow! + # I do not know why they have decided to make this change; + # as far as I remember it was done exactly during winter->summer switching + # so we (Novosibirsk) simply did not switch. + # Tomsk is still 4 hours ahead of Moscow. Zone Asia/Novosibirsk 5:31:40 - LMT 1924 May 2 6:00 - NSK 1957 Mar 7:00 Russia NS%s 1991 Mar 31 2:00s 6:00 1:00 NSD 1991 Sep 29 2:00s 6:00 - NSK 1992 Jan 19 2:00s ! 7:00 Russia NS%s 1994 Mar 27 2:00s ! 6:00 1:00 NSD 1994 Sep 25 2:00s ! 6:00 Russia NS%s ! Zone Asia/Tomsk 5:39:52 - LMT 1924 May 2 ! 6:00 - TSK 1957 Mar ! 7:00 Russia TS%s 1991 Mar 31 2:00s ! 6:00 1:00 TSD 1991 Sep 29 2:00s ! 6:00 - TSK 1992 Jan 19 2:00s ! 7:00 Russia TS%s Zone Asia/Irkutsk 6:57:20 - LMT 1880 6:57 - LST 1924 May 2 7:00 - ISK 1957 Mar *************** *** 1725,1731 **** Rule Spain 1977 1978 - Apr 2 23:00 1:00 " DST" Rule Spain 1978 only - Oct 1 1:00 0 - # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Europe/Madrid 0:14:44 - LMT 1901 0:00 Spain WET%s 1946 Sep 30 1:00 Spain MET%s 1979 Apr 1 2:00 1:00 M-Eur MET%s --- 1790,1796 ---- Rule Spain 1977 1978 - Apr 2 23:00 1:00 " DST" Rule Spain 1978 only - Oct 1 1:00 0 - # Zone NAME GMTOFF RULES FORMAT [UNTIL] ! Zone Europe/Madrid -0:14:44 - LMT 1901 0:00 Spain WET%s 1946 Sep 30 1:00 Spain MET%s 1979 Apr 1 2:00 1:00 M-Eur MET%s diff -c ty/northamerica tz/northamerica *** ty/northamerica Sat Jun 4 10:12:51 1994 --- tz/northamerica Wed Aug 17 23:23:49 1994 *************** *** 5,10 **** --- 5,15 ---- # go ahead and edit the file (and please send any changes to # tz(a)elsie.nci.nih.gov for general use in the future). + # From Paul Eggert <eggert(a)twinsun.com> (August 17, 1994): + # A reliable and entertaining source about time zones is + # Derek Howse, Greenwich time and the discovery of the longitude, + # Oxford University Press (1980). + ############################################################################### # United States *************** *** 106,111 **** --- 111,121 ---- # Samoa standard time # The law doesn't give abbreviations. + # From Paul Eggert <eggert(a)twinsun.com> (August 16, 1994): + # Howse writes that Alaska switched from the Julian to the Gregorian calendar, + # and from east-of-GMT to west-of-GMT days, in 1867 when the US purchased it + # from Russia. We don't have this data pinned down yet, though. + # Easy stuff first--including Alaska, where we ignore history (since we # can't tell if we should give Yukon time or Alaska-Hawaii time for "old" # times). *************** *** 148,155 **** -5:00 US E%sT # Samoa just changes names. No DST, per Naval Observatory. ! Zone Pacific/Samoa -11:22:48 - LMT 1911 -11:30 - SST 1950 -11:00 - NST 1967 Apr # N=Nome -11:00 - BST 1983 Nov 30 # B=Bering --- 158,171 ---- -5:00 US E%sT # Samoa just changes names. No DST, per Naval Observatory. + # + # Howse writes that in 1879 the King of Samoa decided to change + # ``the date in his kingdom from the Antipodean to the American system, + # ordaining -- by a masterpiece of diplomatic flattery -- that + # the Fourth of July should be celebrated twice in that year.'' ! Zone Pacific/Samoa 12:37:12 - LMT 1879 Jul 5 ! -11:22:48 - LMT 1911 -11:30 - SST 1950 -11:00 - NST 1967 Apr # N=Nome -11:00 - BST 1983 Nov 30 # B=Bering

1 0