- tz - lists.iana.org

Re: [tz] Getting close to new release: testing, testing, ... [SEC=UNOFFICIAL]
by Timothy Arceri Sept. 11, 2013

Sept. 11, 2013

Will you be including the updates to the Australian Daylight Saving's abbreviations in this release? http://mm.icann.org/pipermail/tz/2013-April/019099.html -----Original Message----- From: tz-bounces(a)iana.org [mailto:tz-bounces@iana.org] On Behalf Of Paul Eggert Sent: Wednesday, 11 September 2013 7:55 PM To: Time zone mailing list Subject: [tz] Getting close to new release: testing, testing, ... We need to release a new version soon, because of Fiji. I did further testing and it appears that the recent changes to add meta-information to the zic output won't fly, because they're incompatible with the GNU C library on Ubuntu 12.04. So we need to rethink that feature. There's no rush to introduce it, so let's omit it from the next release. Also, the -t option recently added to tzselect seems like it will be superseded by the tzwinnow approach, whenever we get that working and stable, so for now I think I'd rather omit this. There are a few other problems found by "make public", mostly links that were in the wrong files. I'll post proposed changes soon. If other people could do some testing that'd be nice. You can run "make public". The output should contain the following diagnostics: warning: "antarctica", line 318: Antarctica/Palmer: pre-2013 clients may mishandle distant timestamps warning: "asia", line 1412: 24:00 not handled by pre-1998 versions of zic warning: "asia", line 2332: 24:00 not handled by pre-1998 versions of zic warning: "asia", line 1026: Asia/Jerusalem: pre-2013 clients may mishandle distant timestamps (rule from "asia", line 1021) warning: "asia", line 1315: Asia/Amman: pre-1994 clients may mishandle distant timestamps warning: "asia", line 2016: Asia/Gaza: pre-2013 clients may mishandle distant timestamps warning: "asia", line 2347: Asia/Hebron: pre-2013 clients may mishandle distant timestamps warning: "australasia", line 269: Pacific/Fiji: pre-2013 clients may mishandle distant timestamps warning: "europe", line 998: America/Godthab: pre-2013 clients may mishandle distant timestamps warning: "southamerica", line 1141: America/Santiago: pre-2013 clients may mishandle distant timestamps warning: "southamerica", line 1313: Pacific/Easter: pre-2013 clients may mishandle distant timestamps along with a very long section that starts as follows, which shows that the tz code is still broken on platforms with unsigned 32-bit time_t (this is a longstanding problem). checking uint32_t zones ... --- tzpublic/int64_t.out 2013-09-11 02:43:50.871343089 -0700 +++ tzpublic/uint32_t.out 2013-09-11 02:43:55.907343185 -0700 @@ -210,278 +210,6 @@ Europe/Andorra Sun Mar 29 01:00:00 2037 UT = Sun Mar 29 03:00:00 2037 CEST isdst=1 Europe/Andorra Sun Oct 25 00:59:59 2037 UT = Sun Oct 25 02:59:59 2037 CEST isdst=1 Europe/Andorra Sun Oct 25 01:00:00 2037 UT = Sun Oct 25 02:00:00 2037 CET isdst=0 -Europe/Andorra Sun Mar 28 00:59:59 2038 UT = Sun Mar 28 01:59:59 2038 CET isdst=0 -Europe/Andorra Sun Mar 28 01:00:00 2038 UT = Sun Mar 28 03:00:00 2038 CEST isdst=1 -Europe/Andorra Sun Oct 31 00:59:59 2038 UT = Sun Oct 31 02:59:59 2038 CEST isdst=1

3 3

POSIX extension check
by Arthur David Olson Sept. 10, 2013

Sept. 10, 2013

It's probably worthwhile to check whether extended POSIX in zic-produced binaries will cause grief when those binaries are used with old versions of localtime.c. If so, one or more of documentation, a zic warning, or a version number bump may be in order. --ado

8 19

a patch for zic.c to allow 'follow rules'
by Alois Treindl Sept. 10, 2013

Sept. 10, 2013

Dear Arthur, I have been preparing a small modification for zic.c which will allow it to understand a 'follow rule' in zone files, like this: # experimental table for Geneva, to test the 'follow' mechanism Zone Europe/Geneva 0:24:37 - LMT 1848 Sep 12 0:24:37 - GET 1894 Jun # Geneva MTime 0 follow Europe/Zurich For test purposes, one can simply insert this zone in the europe file. The feature is helpful in the extension of tzdata to cover complete timezone history. For this purpose, about 1000 additional zone files need to be written, and to be maintained. The process to do so has started in the astrological community, as it needs a complete pre-1970 timezone history. I will not bother you with details. I intend to help creating and maintaining a set of files like 'europe_hist', 'asia_hist' etc which contain the additional zones. The 'follow rule' will allow to keep these extra zone files very small, as usually the additional zones will all have a cross-over moment into a regular tzdata zone. I have for the moment called the modified zic source file zicx.c and prepared a patch file for zic.c to implement the 'follow rule' feature. I have tried to keep the modification very small. Please have a look at the patch, and check for the errors I have probably made. Description of the code: ------------------------ The follow rule must be the last line in a zone, and recursion is not allowed. It is parsed in inzsub() which reacts on GMTOFF = 0 and the word 'follow' in the RULE field. The zone line is stored in zones[] with a special value z_gmtoff = FOLLOW_MARK and the zone_name to follow in field z_rule (which is abused for this purpose). Before the call to outzone() the two sets of zone lines are patched together in a temporary array, so that outzone() and all functions deeper down() need not be modified. Patch ----- --- zic.c 2011-03-09 20:41:27.000000000 +0100 +++ zicx.c 2011-08-25 16:09:04.000000000 +0200 @@ -262,6 +262,17 @@ static int typecnt; #define YR_MAXIMUM 1 #define YR_ONLY 2 +/* +** follow rules, added by Alois Treindl August 2011 +** Zones may end with a line: 0 follow zone_name +** which the parser will represent with FOLLOW_MARK in z_gmtoff, +** and the zone name in z_rule. +** Before the call to outzone() the zone and its follow zone will be +** patched together, so that outzone() sees a regular zone array. +** To keep zone files readable, follow rules cannot be used recursively. +*/ +#define FOLLOW_MARK 999999 + static struct rule * rules; static int nrules; /* number of rules */ @@ -589,7 +600,48 @@ _("%s: More than one -L option specified */ for (j = i + 1; j < nzones && zones[j].z_name == NULL; ++j) continue; - outzone(&zones[i], j - i); + if (zones[j -1].z_gmtoff == FOLLOW_MARK) { + /* copy zone and follow zone into one new array */ + int k,n,m, nrows; + struct zone *xzones, *zp; + nrows = j - i - 1; + zp = &zones[j - 1]; /* line with the follow rule */ + xzones = (struct zone *) (void *) emalloc((int) (nrows * sizeof *xzones)); + for (k = 0; k < nrows; k++) + xzones[k] = zones[i + k]; + /* now find the follow zone in array zones[] */ + for (m = 0; m < nzones; m++) { + if (zones[m].z_name != NULL && strcmp(zp->z_rule, zones[m].z_name) == 0) break; + } + if (m == nzones) { /* error, follow zone not found */ + char *cp; + cp = emalloc(80 + strlen(zp->z_rule) + strlen(zones[i].z_name));; + sprintf(cp, "For zone %s follow zone %s not found, no zonefile created.", zones[i].z_name, zp->z_rule); + eat(zp->z_filename, zp->z_linenum); + error(cp); + ifree(cp); + ifree((void *)xzones); + } + /* now find the next date in the follow zone */ + for (n = m + 1; n < nzones; n++) { + if (zp->z_untiltime < zones[n].z_untiltime) break; + } + /* missing errorcode for case n == nzones, + * assume we are still in same follow zone. + * The follow zone part we need starts at zones[n]. + * Now find where follow zone ends, will be m. + */ + for (m = n; m < nzones && zones[m].z_name == NULL; ++m) + continue; + xzones = (struct zone *) (void *) erealloc((char *) xzones, (int) ((nrows + m - n) * sizeof *xzones)); + for (k = 0; k < m - n; k++) + xzones[nrows + k] = zones[n + k]; + nrows += m - n; + outzone(&xzones[0], nrows); + ifree((void *) xzones); + } else { + outzone(&zones[i], j - i); + } } /* ** Make links. @@ -784,7 +836,7 @@ associate(void) } for (i = 0; i < nzones; ++i) { zp = &zones[i]; - if (zp->z_nrules == 0) { + if (zp->z_nrules == 0 && zp->z_gmtoff != FOLLOW_MARK) { /* ** Maybe we have a local standard time offset. */ @@ -1079,11 +1131,23 @@ const int iscont; return FALSE; } } - z.z_rule = ecpyalloc(fields[i_rule]); - z.z_format = ecpyalloc(fields[i_format]); - if (max_format_len < strlen(z.z_format)) - max_format_len = strlen(z.z_format); - hasuntil = nfields > i_untilyear; + /* check for 0 follow zonename + ** zonename must contain at least one /, and follow must be + * 'follow' or an abbreviation thereof. + */ + if (z.z_gmtoff == 0 && strchr(fields[i_format], '/') != NULL + && itsabbr(fields[i_rule], "follow")) { + z.z_gmtoff = FOLLOW_MARK; + z.z_rule = ecpyalloc(fields[i_format]); + z.z_format = ""; + hasuntil = FALSE; /* no continue of zone now */ + } else { + z.z_rule = ecpyalloc(fields[i_rule]); + z.z_format = ecpyalloc(fields[i_format]); + if (max_format_len < strlen(z.z_format)) + max_format_len = strlen(z.z_format); + hasuntil = nfields > i_untilyear; + } if (hasuntil) { z.z_untilrule.r_filename = filename; z.z_untilrule.r_linenum = linenum;

1 1

DESTDIR patch
by Dr. Volker Zell Sept. 10, 2013

Sept. 10, 2013

Hi Attached a patch which adds DESTDIR support to the Makefile. Ciao Volker

2 1

Fiji daylight savings
by David Wheeler Sept. 9, 2013

Sept. 9, 2013

Hi all, we've just received notice that Fiji will start daylight savings shortly, but this doesn't seem to be represented in tzdata. See link below for details. http://www.fiji.gov.fj/Media-Center/Press-Releases/DAYLIGHT-SAVING-STARTS-O… Cheers, -- David _____________________________ David Wheeler - Lead Engineer david(a)inomial.com p +61 3 9663 3554 WINNER 2013 ACOMMS Awards for Services to Industry - Professional services Telecommunications and Utility Billing, Rating, Policy and Session Management

3 2

Rules for TZ+ database
by Lester Caine Sept. 9, 2013

Sept. 9, 2013

First I'd like to thank Kevin Lyda for taking the time to construct the original tz repository. It is a quite remarkable piece of work. I'm currently looking at a beautifully documented history of the Theory file from the moment Authur created it on 16/2/1987 ... 1987-02-16 in modern money ... The first rule is +* In SVR2, time display in a process is controlled by the environment + variable TZ, which "must be a three-letter time zone name, followed + by a munber representing the difference between local time and + Greenwich Mean Time in hours, followed by an optional three-letter + name for a daylight time zone;" when the optional daylight time zone is + present, "standard U.S.A. Daylight Savings Time conversion is applied." + This means that SVR2 can't deal with other (for example, Australian) + daylight savings time rules, or situations where more than two + time zone abbreviations are used in an area. So it was very much conceived as an 'American' system. Handling other daylight saving offsets or more complex rules was to difficult at that time so ignored. I'll fast forward over the changes which introduced long names to replace the three letter codes, and set up rules about size of population being used to select them. Politics is nothing new and the entire database is an archive of POLITICAL decisions. Until 2001 when a commit was added from a certain Paul Eggert ... +This naming convention is not intended for use by inexperienced users +to select TZ values by themselves (though they can of course examine +and reuse existing settings). Distributors should provide +documentation and/or a simple selection interface that explains the +names; see the 'tzselect' program supplied with this distribution for +one example. And the new rule of + * Uniquely identify every national region where clocks have all + agreed since 1970. This is essential for the intended use: static + clocks keeping local civil time. Does not SPECIFICALLY rule out the gathering of pre 1970 data? It just sets the ground rules for ONE view of the data to be limited. This is about making the data more accessible and was probably the wrong approach even back then. I'll skip the 'frivolity' of adding Mars time in 2004, but it does have relevance to the next step forward. All documented data is valid! http://lsces.org.uk/hg/tz/rev/8a52c38a5f56 is the change that pulls support for specifically 32 bit systems, that note had only JUST been added but is the first reference on scope that I've found? Then finally there is a formal definition of the SCOPE of the database in http://lsces.org.uk/hg/tz/rev/7c18a2e16943 so up until that time data HAS been gathered for the whole of time not just post 1970. I'm more than happy to accept this as the rules for 'TZ' but things have moved on considerably since 1987 and substantially more material is now available and easily accessed to provide insight into all of the documented changes to time standards. So if the 'TZ' distribution is going to ignore that material then we need to set up a 'TZ+' distribution that actively includes all available material. It's not a question it's a statement. Reviewing the Theory file of cause we fall at the first hurdle since the POSIX time format has difficulty coping with some of the intricacies of time management. While encoding a daylight saving change in the time is to be commended, it is only right for a specific period of time. The more accurate approach is purely to identify a 'set of rules' that can be used. This also then automatically covers the provision of leap seconds. What I am saying here is that POSIX is just an implementation detail and while mapping the data to it does require defining, it's not fundamental to the real data. So lets use a standard that is better at handling the modern systems. Obviously I fundamentally disagree with the current scope and that should probably have been disputed in 2011. If one accepts that POSIX is incapable of handling the material, then applying one of it's limitations is also wrong? Since the Calendrical issues section already includes the whole of history, we do have a good base to build on, and are already discussing what 'Universal Time' was prior to 1970. If we can agree that while the validity of some legacy data may be questionably, it is a fact of life that many of these events happened, me just have some uncertainty as to when they happened? I think we can also agree that there is substantial new material which is currently only recorded in notes and which can only enhance the historic record? I'm under no illusion that the problems of manipulating this data into a more usable format is substantial, but it is not impossible. NAMING 'timezones' is the fundamental problem here, and the "This naming convention is not intended for use by inexperienced users" is of fundamental importance here. Mapping rules to usable names is all that is required, so internally in the data we have something suitable for managing the complexity of the problem, while outside a naive user punches in an ISO3166 and gets a timezone suitable for the time frame he is working in. There is a substantial amount of additional history here that could potentially be exposed, such as, for example, ISO3166 codes which have been superseded, or even 'old' TZ names which are now recorded for posterity in archives! The 'backward' file is missing key information on when a particular 'match' was changed, and while dates are not particularly critical, there may be fundamental data provided if one of the legacy names is being reviewed and the CURRENT rule set no longer matches what was being supplied at that time. With hg (or git) I can call up an historic view of backward, and then select a view of the data at that time. Something that one time would have been a substantial amount of work happens in the click of a mouse. DVCS provides a view of the information in a format that relates to how it was entered. That data can be viewed in many other ways if we provide the right tools, that is the key here. 'winnowing' is just one way of manipulating the data, and another would be 'time slicing', providing a snapshot of all the rules active at a particular date. Currently there are a much smaller number of rules active than there were pre-1970, and pre standard time there were an infinite number due to all the different methods of tracking time. During the transition from then until now we have some complex information to map, such as French stations being 5 minutes drift, and UK trains using a different time to the legal system. But if we are looking at times when those rules apply then we need to know that there were differences. There was recorded desention to many summertime changes and this happened in a time where those facts were recorded so that material needs to be made available once it is established. This cuases no end of problems in identifying each area affected, but that's why I brought up the OHM historic mapping. Linking up with that, simple things like historic changes of country names can link us to the appropriate data. This may well require the provision of more than one rule, so that is something that needs handling - with notes if necessary. I've not got as far as I would like and I need to get on, but there is more than enough here already. OK 'TZ' only provides data from 1970 but 'TZ+' would provide all the historic data including the 'TZ' filtered set and additional data within the TZ timeframe. -- Lester Caine - G8HFL ----------------------------- Contact - http://lsces.co.uk/wiki/?page=contact L.S.Caine Electronic Services - http://lsces.co.uk EnquirySolve - http://enquirysolve.com/ Model Engineers Digital Workshop - http://medw.co.uk Rainbow Digital Media - http://rainbowdigitalmedia.co.uk

13 56

US osm timezone
by Lester Caine Sept. 9, 2013

Sept. 9, 2013

http://overpass-turbo.eu/s/Zf Will take a couple of minutes then ask about large data set. OK US timezone areas need a bit of a tidyup which was why this was taking so long :( I'd certainly be looking to clean up all the little areas back to the bigger boundaries if that is possible, and adding the missing zones ... But THAT is the whole point, we can simply edit this data ourselves. -- Lester Caine - G8HFL ----------------------------- Contact - http://lsces.co.uk/wiki/?page=contact L.S.Caine Electronic Services - http://lsces.co.uk EnquirySolve - http://enquirysolve.com/ Model Engineers Digital Workshop - http://medw.co.uk Rainbow Digital Media - http://rainbowdigitalmedia.co.uk

3 5

tz dependency lat & lng
by kokosani kokosani Sept. 8, 2013

Sept. 8, 2013

7 27

[PATCH] New file 'pre1970' for zones that differ only in pre-1970 time stamps.
by Paul Eggert Sept. 7, 2013

Sept. 7, 2013

This lets us preserve information about pre-1970 time stamps when we change a Zone to a Link to another zone whose time stamps agree after 1970. This should address concerns about some recent changes that removed this information. This implementation is a stripped-down version of a suggestion by Andrew Main (Zefram) in <http://mm.icann.org/pipermail/tz/2013-August/019615.html> and <http://mm.icann.org/pipermail/tz/2013-August/019639.html> to allow filtering tz data by date range. Unlike Zefram's suggestion, this implementation supports only two date ranges, namely 1970 on, using 'make BACKWARD=backward'; and all dates, using 'make BACKWARD="pre1970 back-pre1970"'. At some point I'd like to improve it to support arbitrary date ranges, but at least we've now restored the data whose loss was of some concern. * .gitignore: Add back-pre1970. * Makefile (BACKWARD): New macro. (YDATA): Use it instead of 'backward'. (AWK_SCRIPTS): New macro, with additional script back-pre1970.awk. (MISC): Use it. (back-pre1970): New rule. (clean_misc): Clean back-pre1970. Also clean time.tab, while we're at it. (check_public): Don't require pre1970 to stand alone. * pre1970, back-pre1970.awk: New files. --- .gitignore | 1 + Makefile | 32 +++++- back-pre1970.awk | 18 ++++ pre1970 | 291 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 337 insertions(+), 5 deletions(-) create mode 100644 back-pre1970.awk create mode 100644 pre1970 diff --git a/.gitignore b/.gitignore index 18dbbcc..28b1bc9 100644 --- a/.gitignore +++ b/.gitignore @@ -4,6 +4,7 @@ *.txt *~ ChangeLog +back-pre1970 date leapseconds time.tab diff --git a/Makefile b/Makefile index a74d1a7..ffddb08 100644 --- a/Makefile +++ b/Makefile @@ -49,6 +49,22 @@ POSIXRULES= America/New_York ZONETABTYPE= zone +# How to support obsolescent time zones in a backward-compatible way. +# This variable affects only pre-1970 time stamps, on hosts that support them. +# It has two possible values, 'backward' and 'pre1970 back-pre1970'. +# +# 'backward' is the traditional approach, and is simpler and more efficient; +# it is designed to generate one zone for each region where clocks have agreed +# since 1970. +# +# 'pre1970 back-pre1970' can generate more than one zone in that situation, +# which means it can preserve a bit of pre-1970 data that 'backward' does not; +# almost all pre-1970 data is missing, though, so don't get your hopes up. +# +# Sometimes 'backward' is more-compatible with earlier versions of this database, +# and sometimes 'pre1970 back-pre1970' is; it depends on the situation. +BACKWARD= backward + # Also see TZDEFRULESTRING below, which takes effect only # if the time zone files cannot be accessed. @@ -322,7 +338,7 @@ COMMON= Makefile DOCS= README Theory $(MANS) date.1 PRIMARY_YDATA= africa antarctica asia australasia \ europe northamerica southamerica -YDATA= $(PRIMARY_YDATA) pacificnew etcetera backward +YDATA= $(PRIMARY_YDATA) pacificnew etcetera $(BACKWARD) NDATA= systemv factory SDATA= solar87 solar88 solar89 TDATA= $(YDATA) $(NDATA) $(SDATA) @@ -330,9 +346,10 @@ TABDATA= iso3166.tab time.tab zone.tab DATA= $(YDATA) $(NDATA) $(SDATA) $(TABDATA) \ leap-seconds.list yearistype.sh WEB_PAGES= tz-art.htm tz-link.htm +AWK_SCRIPTS= back-pre1970.awk checktab.awk leapseconds.awk zone-time.awk MISC= usno1988 usno1989 usno1989a usno1995 usno1997 usno1998 \ - $(WEB_PAGES) checktab.awk leapseconds.awk workman.sh \ - zoneinfo2tdf.pl + $(WEB_PAGES) $(AWK_SCRIPTS) \ + workman.sh zoneinfo2tdf.pl ENCHILADA= $(COMMON) $(DOCS) $(SOURCES) $(DATA) $(MISC) # And for the benefit of csh users on systems that assume the user @@ -423,6 +440,9 @@ zones: $(REDO) time.tab: $(YDATA) zone.tab zone-time.awk $(AWK) -f zone-time.awk $(YDATA) >$@ +back-pre1970: pre1970 backward + $(AWK) -v pre1970=pre1970 -f $@.awk backward >$@ + $(TZLIB): $(LIBOBJS) -mkdir $(TOPDIR) $(LIBDIR) ar ru $@ $(LIBOBJS) @@ -457,6 +477,7 @@ check_web: $(WEB_PAGES) clean_misc: rm -f core *.o *.out \ + back-pre1970 time.tab \ date leapseconds tzselect version.h zdump zic yearistype clean: clean_misc rm -f -r tzpublic @@ -488,7 +509,7 @@ set-timestamps: $$cmd || exit; \ done -# The zics below ensure that each data file can stand on its own. +# The zics below ensure that each non-pre1970 data file can stand on its own. # We also do an all-files run to catch links to links. check_public: $(ENCHILADA) @@ -496,7 +517,8 @@ check_public: $(ENCHILADA) make "CFLAGS=$(GCC_DEBUG_FLAGS)" mkdir tzpublic for i in $(TDATA) ; do \ - $(zic) -v -d tzpublic $$i 2>&1 || exit; \ + test $$i = pre1970 || $(zic) -v -d tzpublic $$i 2>&1 \ + || exit; \ done $(zic) -v -d tzpublic $(TDATA) rm -f -r tzpublic diff --git a/back-pre1970.awk b/back-pre1970.awk new file mode 100644 index 0000000..f7c54fc --- /dev/null +++ b/back-pre1970.awk @@ -0,0 +1,18 @@ +# Generate 'back-pre1970' from the two input files 'pre1970' and 'backward'. +# The output consists of all lines in 'backward' that are not links to +# files mentioned in 'pre1970'. Think of it as 'backward' minus 'pre1970'. + +# The 'backward' file is the input. +# The awk variable 'pre1970' contains the name of the pre1970 file. + +# This file is in the public domain. + +# Contributed by Paul Eggert. + +BEGIN { + while ((getline <pre1970) == 1) + if ($1 == "Zone") + pre1970_zone[$2] = 1 +} + +! (/^Link/ && pre1970_zone[$3]) { print } diff --git a/pre1970 b/pre1970 new file mode 100644 index 0000000..d8b8f34 --- /dev/null +++ b/pre1970 @@ -0,0 +1,291 @@ +# Pre-1970 data + +# This file is in the public domain. + +# This file contains zones that were formerly in other source files, +# but were later removed or replaced by backward-compatibility links +# as they differ from other zones only in pre-1970 time stamps. + +# Although the tz database focuses on post-1970 time stamps, these +# entries are retained here as they may be of some use to people +# interested in pre-1970 time stamps, even though they cover only a +# tiny sliver of pre-1970 data and are unreliable for that data. +# Also, these entries can help with backward compatibility with some +# old versions of the tz database. They are incompatible with other +# old versions of the database, though; it depends on which old +# version you're interested in. + +# Entries are sorted by Zone name. Each entry is preceded by the name +# of the country that the entry is in, along with any other commentary +# and rules associated with the entry. Some rules, e.g., 'Canada', +# are defined by other source files; this file is not intended to be +# used without those other files. + +# Zone NAME GMTOFF RULES FORMAT [UNTIL] + +# Mali +# no longer different from Bamako, but too famous to omit +Zone Africa/Timbuktu -0:12:04 - LMT 1912 + 0:00 - GMT + +# Anguilla +Zone America/Anguilla -4:12:16 - LMT 1912 Mar 2 + -4:00 - AST + +# Antigua and Barbuda +Zone America/Antigua -4:07:12 - LMT 1912 Mar 2 + -5:00 - EST 1951 + -4:00 - AST + +# Argentina +# Chubut (CH) +# The name "Comodoro Rivadavia" exceeds the 14-byte POSIX limit. +Zone America/Argentina/ComodRivadavia -4:30:00 - LMT 1894 Oct 31 + -4:16:48 - CMT 1920 May + -4:00 - ART 1930 Dec + -4:00 Arg AR%sT 1969 Oct 5 + -3:00 Arg AR%sT 1991 Mar 3 + -4:00 - WART 1991 Oct 20 + -3:00 Arg AR%sT 1999 Oct 3 + -4:00 Arg AR%sT 2000 Mar 3 + -3:00 - ART 2004 Jun 1 + -4:00 - WART 2004 Jun 20 + -3:00 - ART + +# Aruba +Zone America/Aruba -4:40:24 - LMT 1912 Feb 12 # Oranjestad + -4:30 - ANT 1965 # Netherlands Antilles Time + -4:00 - AST + +# Canada + +Zone America/Atikokan -6:06:28 - LMT 1895 + -6:00 Canada C%sT 1940 Sep 29 + -6:00 1:00 CDT 1942 Feb 9 2:00s + -6:00 Canada C%sT 1945 Sep 30 2:00 + -5:00 - EST + +Zone America/Blanc-Sablon -3:48:28 - LMT 1884 + -4:00 Canada A%sT 1970 + -4:00 - AST + +# Cayman Is +Zone America/Cayman -5:25:32 - LMT 1890 # Georgetown + -5:07:12 - KMT 1912 Feb # Kingston Mean Time + -5:00 - EST + +# Canada +Zone America/Coral_Harbour -5:32:40 - LMT 1884 + -5:00 NT_YK E%sT 1946 + -5:00 - EST + +# Curacao +Zone America/Curacao -4:35:47 - LMT 1912 Feb 12 # Willemstad + -4:30 - ANT 1965 # Netherlands Antilles Time + -4:00 - AST + +# Dominica +Zone America/Dominica -4:05:36 - LMT 1911 Jul 1 0:01 # Roseau + -4:00 - AST + +# Mexico +Zone America/Ensenada -7:46:28 - LMT 1922 Jan 1 0:13:32 + -8:00 - PST 1927 Jun 10 23:00 + -7:00 - MST 1930 Nov 16 + -8:00 - PST 1942 Apr + -7:00 - MST 1949 Jan 14 + -8:00 - PST 1996 + -8:00 Mexico P%sT + +# US +Zone America/Fort_Wayne -5:00 US E%sT 1946 + -5:00 - EST # Always EST as of 1986 + +# Grenada +Zone America/Grenada -4:07:00 - LMT 1911 Jul # St George's + -4:00 - AST + +# Guadeloupe +Zone America/Guadeloupe -4:06:08 - LMT 1911 Jun 8 # Pointe a Pitre + -4:00 - AST + +# Canada +# Rule NAME FROM TO TYPE IN ON AT SAVE LETTER/S +Rule Mont 1917 only - Mar 25 2:00 1:00 D +Rule Mont 1917 only - Apr 24 0:00 0 S +Rule Mont 1919 only - Mar 31 2:30 1:00 D +Rule Mont 1919 only - Oct 25 2:30 0 S +Rule Mont 1920 only - May 2 2:30 1:00 D +Rule Mont 1920 1922 - Oct Sun>=1 2:30 0 S +Rule Mont 1921 only - May 1 2:00 1:00 D +Rule Mont 1922 only - Apr 30 2:00 1:00 D +Rule Mont 1924 only - May 17 2:00 1:00 D +Rule Mont 1924 1926 - Sep lastSun 2:30 0 S +Rule Mont 1925 1926 - May Sun>=1 2:00 1:00 D +# The 1927-to-1937 rules can be expressed more simply as +# Rule Mont 1927 1937 - Apr lastSat 24:00 1:00 D +# Rule Mont 1927 1937 - Sep lastSat 24:00 0 S +# The rules below avoid use of 24:00 +# (which pre-1998 versions of zic cannot handle). +Rule Mont 1927 only - May 1 0:00 1:00 D +Rule Mont 1927 1932 - Sep lastSun 0:00 0 S +Rule Mont 1928 1931 - Apr lastSun 0:00 1:00 D +Rule Mont 1932 only - May 1 0:00 1:00 D +Rule Mont 1933 1940 - Apr lastSun 0:00 1:00 D +Rule Mont 1933 only - Oct 1 0:00 0 S +Rule Mont 1934 1939 - Sep lastSun 0:00 0 S +Rule Mont 1946 1973 - Apr lastSun 2:00 1:00 D +Rule Mont 1945 1948 - Sep lastSun 2:00 0 S +Rule Mont 1949 1950 - Oct lastSun 2:00 0 S +Rule Mont 1951 1956 - Sep lastSun 2:00 0 S +Rule Mont 1957 1973 - Oct lastSun 2:00 0 S +# Zone NAME GMTOFF RULES FORMAT [UNTIL] +Zone America/Montreal -4:54:16 - LMT 1884 + -5:00 Mont E%sT 1918 + -5:00 Canada E%sT 1919 + -5:00 Mont E%sT 1942 Feb 9 2:00s + -5:00 Canada E%sT 1946 + -5:00 Mont E%sT 1974 + -5:00 Canada E%sT + +# Montserrat +Zone America/Montserrat -4:08:52 - LMT 1911 Jul 1 0:01 # Cork Hill + -4:00 - AST + +# Bahamas +# Rule NAME FROM TO TYPE IN ON AT SAVE LETTER/S +Rule Bahamas 1964 1975 - Oct lastSun 2:00 0 S +Rule Bahamas 1964 1975 - Apr lastSun 2:00 1:00 D +# Zone NAME GMTOFF RULES FORMAT [UNTIL] +Zone America/Nassau -5:09:30 - LMT 1912 Mar 2 + -5:00 Bahamas E%sT 1976 + -5:00 US E%sT + +# Trinidad and Tobago +Zone America/Port_of_Spain -4:06:04 - LMT 1912 Mar 2 + -4:00 - AST + +# Brazil +# Rio_Branco is too ambiguous, since there's a Rio Branco in Uruguay too. +Zone America/Porto_Acre -4:31:12 - LMT 1914 + -5:00 Brazil AC%sT 1988 Sep 12 + -5:00 - ACT + +# Argentina +# Santa Fe (SF), Entre Rios (ER), Corrientes (CN), Misiones (MN), Chaco (CC), +# Formosa (FM), La Pampa (LP), Chubut (CH) +Zone America/Rosario -4:02:40 - LMT 1894 Nov + -4:16:44 - CMT 1920 May + -4:00 - ART 1930 Dec + -4:00 Arg AR%sT 1969 Oct 5 + -3:00 Arg AR%sT 1991 Jul + -3:00 - ART 1999 Oct 3 0:00 + -4:00 Arg AR%sT 2000 Mar 3 0:00 + -3:00 - ART + +# St Kitts-Nevis +Zone America/St_Kitts -4:10:52 - LMT 1912 Mar 2 # Basseterre + -4:00 - AST + +# St Lucia +Zone America/St_Lucia -4:04:00 - LMT 1890 # Castries + -4:04:00 - CMT 1912 # Castries Mean Time + -4:00 - AST + +# Virgin Is +Zone America/St_Thomas -4:19:44 - LMT 1911 Jul # Charlotte Amalie + -4:00 - AST + +# St Vincent and the Grenadines +Zone America/St_Vincent -4:04:56 - LMT 1890 # Kingstown + -4:04:56 - KMT 1912 # Kingstown Mean Time + -4:00 - AST + +# British Virgin Is +Zone America/Tortola -4:18:28 - LMT 1911 Jul # Road Town + -4:00 - AST + +# McMurdo, Ross Island, since 1955-12 +Zone Antarctica/McMurdo 0 - zzz 1956 + 12:00 NZAQ NZ%sT + +# Japan +Zone Asia/Ishigaki 8:16:36 - LMT 1896 + 8:00 - CST + +# Israel +Zone Asia/Tel_Aviv 2:19:04 - LMT 1880 + 2:21 - JMT 1918 + 2:00 Zion I%sT + +# Russia +Zone Asia/Tomsk 5:39:52 - LMT 1924 May 2 + 6:00 - TSK 1957 Mar + 7:00 Russia TS%s 1991 Mar 31 2:00s + 6:00 1:00 TSD 1991 Sep 29 2:00s + 6:00 - TSK 1992 Jan 19 2:00s + 7:00 Russia TS%s + +# Svalbard & Jan Mayen +Zone Atlantic/Jan_Mayen -1:00 - EGT + +# Australia +Zone Australia/Canberra 9:56:32 - LMT 1895 Feb + 10:00 - EST 1917 Jan 1 0:01 + 10:00 Aus EST 1971 Oct 31 2:00 + 10:00 AN EST 1981 Oct 25 2:00 + 10:00 1:00 EST 1982 Apr 4 3:00 + 10:00 AN EST + +# UK +Zone Europe/Belfast -0:23:40 - LMT 1880 Aug 2 + -0:25:21 - DMT 1916 May 21 2:00 # Dublin/Dunsink MT + -0:25:21 1:00 IST 1916 Oct 1 2:00s # Irish Summer Time + 0:00 GB-Eire %s 1968 Oct 27 + 1:00 - BST 1971 Oct 31 2:00u + 0:00 GB-Eire %s 1996 + 0:00 EU GMT/BST + +# Slovenia +Zone Europe/Ljubljana 0:58:04 - LMT 1884 + 1:00 - CET 1941 Apr 18 23:00 + 1:00 C-Eur CE%sT 1945 May 8 2:00s + 1:00 1:00 CEST 1945 Sep 16 2:00s + 1:00 - CET 1982 Nov 27 + 1:00 EU CE%sT + +# Bosnia and Herzegovina +Zone Europe/Sarajevo 1:13:40 - LMT 1884 + 1:00 - CET 1941 Apr 18 23:00 + 1:00 C-Eur CE%sT 1945 May 8 2:00s + 1:00 1:00 CEST 1945 Sep 16 2:00s + 1:00 - CET 1982 Nov 27 + 1:00 EU CE%sT + +# Macedonia +Zone Europe/Skopje 1:25:44 - LMT 1884 + 1:00 - CET 1941 Apr 18 23:00 + 1:00 C-Eur CE%sT 1945 May 8 2:00s + 1:00 1:00 CEST 1945 Sep 16 2:00s + 1:00 - CET 1982 Nov 27 + 1:00 EU CE%sT + +# Moldova +Zone Europe/Tiraspol 1:58:32 - LMT 1880 + 1:55 - CMT 1918 Feb 15 # Chisinau MT + 1:44:24 - BMT 1931 Jul 24 # Bucharest MT + 2:00 Romania EE%sT 1940 Aug 15 + 2:00 1:00 EEST 1941 Jul 17 + 1:00 C-Eur CE%sT 1944 Aug 24 + 3:00 Russia MSK/MSD 1991 Mar 31 2:00 + 2:00 Russia EE%sT 1992 Jan 19 2:00 + 3:00 Russia MSK/MSD + +# Croatia +# Zone NAME GMTOFF RULES FORMAT [UNTIL] +Zone Europe/Zagreb 1:03:52 - LMT 1884 + 1:00 - CET 1941 Apr 18 23:00 + 1:00 C-Eur CE%sT 1945 May 8 2:00s + 1:00 1:00 CEST 1945 Sep 16 2:00s + 1:00 - CET 1982 Nov 27 + 1:00 EU CE%sT -- 1.8.1.2

13 23

Re: [tz] [tzdb] Re: Proposed patch - Theory change to reinstate reference to ISO-3166
by random832＠fastmail.us Sept. 6, 2013

Sept. 6, 2013

On Fri, Sep 6, 2013, at 7:26, Tobias Conradi wrote: > > They are three _versions of_ one > > standard > Now we have > 1) edition (Wikipedia) > 2) revision (Clive) > 3) version (random832) http://dictionary.reference.com/browse/synonym If you are honestly claiming your grasp of the English language is really so weak as to fail to understand that these mean the same thing, then I'm sorry for calling you pedantic. > > - the later version supersedes the earlier ones. > The ISO website uses the verb "revise". See above. > I vote for disallowing such comments on the tz mailing list. This is not a democracy. You're free to ignore me. Or even remove me from your "tzdb(a)yahoogroups.com" list, though that will mainly have the effect of preventing _me_ from seeing _your_ emails if you find yourself banned from the tz list again. (For the record, I did not agree with your being banned, but it does say something about the relative thickness of the ice we are each standing on)

2 1