- tz - lists.iana.org

User time zones
by Steven Abner Dec. 9, 2011

Dec. 9, 2011

Thank you for the input! Maybe I should clarify the file. This is an attempt to allow users or peoples access to their times zones. A date string, publication, scanned document, broadcast, etc. can contain the time zone. The tz database even includes these time zones. Some functions even require them to operate. Take the "conceptional problem" example. BRT/BRST are the abbreviations used for the Brazilia Time zone. The ":America/Sao_Paulo" file/location is defined as using the Brazilia Time rule "Brazil". Since this location follows Brazilia Time, it is given the abbreviation for that zone. It is not given a synonym for an offset from UTC. An example to clarify could be the recent offset change of Moscow Time zone from an offset of 3 to that of 4. MSK is the abbreviation for the regional time zone using the standard time definition of that zone. The ":Europe/Moscow" file assigns the offset used for that zone. The Moscow file can now safely be used to represent the "Moskva" rule that is the regional time zone, rather than creating a new zone. Since it is the only location that uses that time zone, one can assign ":Europe/Moscow" file as a link. The GMT example is an oddity case. GMT can stand both for a time, :Etc/GMT which I assume is the observatory location, and the English Isles regional time zone. I am also guessing that that was one of the reasons for UTC, so that an offset of 0 from the observatory would be taken as the offset rather the the time zone the English use. I also only compiled the times, as stated in the file, from 1970 to present. It is known that abbreviations are not unique. However, the list of conflicting zones, see near the end of file, is really small. Especially when Australia is assigned the local, state, country definitions and Indonesia. I will look farther into the assignment to see if any additional zones need creation. As it is clear that a present location might not actually be assigned to a time zone. I did not try to resolve conflicts, just link to the base location file that defined the actual time zone for a region. I did try to make sure to avoid not linking a file that didn't represent the regional time zone, but best to be safe. Thanks again, was helpful! Steve

11 23

Antarctica
by Steven Abner Dec. 8, 2011

Dec. 8, 2011

I was checking that thinggy I created. I came across an oddity. Sooo please verify or invalidate? The Australian government has a web page for their Antarctica division, http://www.antarctica.gov.au/living-and-working/stations/time , which has Casey as 0 hours from AEST/AEDT. The page states modified June 29, 2011. Now translating Australia Time to Olson time of EST/EDT and assuming that the current time they display is that of Casey, with Sydney at a UTC+11(EDT or AEDT) and the database saying UTC+8 for Casey, is this possibly a case of Antarctica being a separate file or does the government have their web page out dated?, or am I mis-interprting things? I didn't check the other stations as I am not sure what is up. This is not an abbreviation question, just so not to link this with what I was discussing earlier. Steve

2 1

Re: [tz] User time zones
by Steven Abner Dec. 8, 2011

Dec. 8, 2011

An addendum, I am not even trying to dictate how the file I submitted be used. I tried to indicate that in the file. One could even use the normal zic output or create one binary file named "Abbr" or "foobar", do a binary search for which file to open from the normal file output of zic. This amounts to two files being read. Again, not trying to limit any possibilities nor suggestions for its use or non-use. This was in response to "required by employer", and I will "force you to do it my way". You may also decide to build structures for more exact ID of a zone origination. This was clearly beyond what was my intent, but super glad it got the thought process going. Steve

1 0

Reply
by Thom Hehl Dec. 8, 2011

Dec. 8, 2011

Can we not fix the emails that come from this list to have the reply to set so all we have to do is hit reply?

4 3

Re: [tz] User time zones
by Steven Abner Dec. 7, 2011

Dec. 7, 2011

LOL, BST stays, only London uses. Last used as actual time zone otherwise was 1983, Bering. Many thanks again for setting me straight! Steve

1 0

User time zones
by Steven Abner Dec. 7, 2011

Dec. 7, 2011

Howdy, I could use some input. I have a different database, lots of reasons for it, which has the attached file as part of the database. I am not an international person, nor is my code yet patented, since the big corps won't take this seriously unless it is. This file was created out of necessity for implementation of operating system functions and a bridge between user and your database, or so I think. Even if you think my thoughts on the intro are invalid, please respond. My initial intent was to submit this for you all to use, but I have already assumed that it will be rejected, the norm! So please, any international users fell free to make suggestive comments. I am in the process of trying to fully automate the list generation, have to hand work some. It has been tested for the strptime(), getdate() and strftime() functions and found not lacking. Of course, this is from test cases I have to think up, since none of the functions I have tested can handle time zones. I am still testing, and re-evaluting for debug-ability and optimizations, so this is not set in concrete. If tz peoples would like to adopt this file, cool! The zic compiler will handle, but your file retrieval will probably need to be altered some. Can't help you there, sorry, different system. There are some notes in the file. In particular this could sate those that aren't fond of the Australia zones and may make Indonesian peoples happy. It addresses, hopefully, French, German and Brazilian peoples too. Off list input also accepted. Steve pheonix(a)zoomtown.com

3 2

Converting from individual cities/states/country names to Windows time zone names
by Daniel White Dec. 6, 2011

Dec. 6, 2011

Hi all, I'm creating a software calculator project, and I'd like my users to be able to convert between time zones using what they're familiar with: country, or city/ state names. So I need to convert from these places to the corresponding Windows time zone, and have been looking for a database online to do so, without success. What I have been able to find is a way to convert from TZID (Olsen) to Windows timezone IDs using this URL: http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/zone_tzid.html So maybe there's a database which maps all the places of the world to TZID, and then I would use a two-step process instead of one. Any help would be much appreciated. When I say 'database', even just a HTML page would do, and then I can extract the right info.

7 14

Fw: Converting from individual cities/states/country names to Windows time zone names
by yoshito_umaoka＠us.ibm.com Dec. 6, 2011

Dec. 6, 2011

> 4) Out of date data > > You may want to map Belarus to (UTC+02:00) Minsk. However, Minsk > (Belarus) is currently using UTC+03:00/no DST. > Microsoft suggests Windows users in Belarus to use (UTC+03:00) > Kakiningrad for now [http://support.microsoft.com/kb/2625508] > BTW, I found Microsoft has already published the update on November 22 [ http://support.microsoft.com/kb/2633952] For this specific instance, display name "(UTC+02:00) Minsk" was changed to "(UTC+02:00) Nicosia", then display name of "(UTC+03:00) Kaliningrad" was changed to "(UTC+03:00) Kaliningrad, Minsk". -Yoshito

1 0

What license IANA is intending to distribute the timezone database under, BSD or public domain
by Fake name Dec. 4, 2011

Dec. 4, 2011

I hope this forum is the correct place to ask this question. This question is intended for the people at IANA. I work for NetApp, and would like to know what license IANA is intending to distribute the timezone database under, BSD or public domain? BSD is referenced in some of the documentation, but in the past people were assuming this was in the public domain until the lawsuit occurred. Thank you in advance for your answer.

7 6

Re: [tz] Rule ChileAQ in antarctica
by Glenn Eychaner Dec. 3, 2011

Dec. 3, 2011

On Dec 2, 2011, at 9:37 PM, tz-request(a)iana.org wrote: > Zone Antarctica/Palmer is currently defined as - > [...] > The comment mentions that Palmer station keeps the same time as Punta > Arenas, Chile. > > However, Rule Chile in southamerica was updated in 2008a, 2010d, 2011c and > 2011e. The rules for Chile after 1999 are defined as below in the current > version. > [...] > If the comment for Antarctica/Palmer is still true, then I think ChileAQ > in antarctica should be also updated. Does anyone know if ChileAQ in > antarctica was intentionally unchanged or, it's just an error? As far as I (one of the people who proposed the Chile 2010/2011 changes) know, it's an error. (I completely forgot about Chile's Antarctic territiory, and that it would appear in a separate file.) Officially, Chile's Antarctic territory is supposed to follow the same rule as the rest of Chile (according to horaoffical.cl). I don't know if that actually happens in practice, or if the other Antarctic territories have also followed all the shifts in Chile's rules. -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

1 0